2002 Cadillac Lcw Black Raised Roof 6-door Limousine Funeral Mortuary Hearse on 2040-cars

Auto blog

Hotter Cadillac ATS-V+ could use LS7 power

Rumor has it Cadillac is working on an even hotter version of the ATS-V, possibly called ATS-V+. And the latest intel from Motor Trend suggests this new model might have a great, big V8 under the hood. The V8 in question is the high-revving, naturally aspirated 7.0-liter LS7 from the Camaro Z/28. The hand-built engine makes 505 horsepower and 481 pound-feet of torque in the Z/28 – a nice increase over the 464 hp and 445 lb-ft in the standard ATS-V, which uses a twin-turbocharged 3.6-liter V6. Motor Trend says the ATS-V+ will come to market with an eight-speed automatic transmission, as well as the seven-speed manual 'box from the Corvette. A dual-clutch transmission will come to market later. Of course, we'll believe it when we see it. But an LS7-powered ATS-V sure sounds like a great package to us. Here's hoping.

Cadillac dealers frustrated over Escalade production snarls

Lincoln went through it during the launch of the MKZ last year, Jeep went through something similar with its Cherokee launch, and now the 2015 Cadillac Escalade has apparently caught the bug: dealer delivery delays because of quality control checks. Automotive News reports that Cadillac dealers have been waiting three times longer than usual - a month or more - from the time an Escalade leaves the assembly line to when it gets delivered. Worse, dealers are saying they don't always know where their vehicles are in transit, or when they are set to arrive. The situation has upset customers who have put down deposits and things have gotten so bad that some dealers have reportedly stopped taking pre-orders.
Cadillac says it has the delay, called "dwell time," down to two weeks, and it expects to cut that to a week by the beginning of September. The company said "a lengthy quality-assurance process on some interior parts" has caused the lag, the report citing additional issues with figuring out which vehicles should be delivered first. A spokesman said that more trucks have been put in the distribution system to work through the backlog, but it's clear it's still going to take some time to set things right, with one dealer telling AN that cars ordered in February and March still haven't arrived.
Brand chief Kurt McNeil said additional personnel are at the Escalade's Arlington, Texas factory to speed up the checks, and spreadsheets tracking every order have been distributed to field staff. Even with the snafu, though, the Escalade is Cadillac's best seller through July.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: