2002 Cadillac Deville Dts Sedan 4-door 4.6l on 2040-cars

Auto blog

2021 Cadillac Escalade, GMC Yukon, Chevy Suburban/Tahoe recalled for stall risk

General Motors is recalling just shy of 15,000 2021 Cadillac Escalade & Escalade ESVs, Chevrolet Suburbans and Tahoes, GMC Yukons and Yukon XLs that were shipped with fuel pumps that were built with a batch of what may be faulty electronic control modules. A pump with a bad module can result in intermittent function, resulting in drivability issues and potential stalls. No serious incidents or injuries have been associated with the issue.  GM says it discovered the issue after analyzing early recall data for the 2021 model SUVs and discovering an unusually high failure rate for fuel pumps manufactured by a single supplier – Vitesco. The company was able to identify the batch and initiate a recall campaign targeting just those vehicles.  "After reviewing the field data, GM determined there were 617 potentially relevant complaints, which were received between April 15, 2020 and August 24, 2021," the company's recall report said. "229 of these complaints reported a stall while standing or moving. No accidents or injuries associated with this condition were found." Any SUVs built with pumps from that batch but not yet sold are being held at dealers for replacement parts. It may take some time for GM to source replacements due to the ongoing electronic parts shortages.  "We are working with the supplier to obtain the required parts as quickly as possible," GM said in its notice to dealers. "When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles."

2020 Cadillac XT5 spied undisguised with infotainment from CT5

The reveal of the 2020 Cadillac XT5 crossover must be seriously near, because one of our spy photographers caught the new one completely undisguised. Seriously, there aren't any vinyl coverings anywhere, and the interior was completely bare, too. The update is minimal for the most part, but the interior reveals a big infotainment change. Before we get inside, we'll do a quick overview of the exterior. The front grille has a new mesh insert, and the lower air dam has a wider, thinner metallic accent. At the back, the colors for the faux skid plate or diffuser motif have been swapped. And that's it for the exterior. See? Told you it would be quick. The interior is nearly unchanged, too, except for the aforementioned infotainment system. Instead of the current model's touchscreen-only interface, the new XT5 adopts the control knob featured in the XT4, XT6 and CT5. It fits quite naturally behind the electronic shift lever. If it's like the system in other Cadillacs, fans of the touchscreen shouldn't worry, because you'll still be able to use the touch functions if you wish. Odds are we're months away from the new XT5 hitting dealers, since this is clearly a finished prototype. It will most certainly offer the same 3.6-liter, 310-horsepower V6 and 8-speed automatic of the current model. It's possible Cadillac will introduce a slightly more affordable 2.0-liter turbocharged inline-4 as an option, possibly even a turbo inline-4 hybrid powertrain, since both powertrains are available on the current Chinese-market XT5.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: