1994 Cadillac Deville Base Sedan 4-door 4.9l on 2040-cars

Auto blog

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Cadillac recalls 17,500 SRX CUVs in Canada

When reporting on recalls, Autoblog generally tries to focus on the US market. However, a recent campaign in Canada seems important enough to be worth mentioning because it could eventually affect American drivers. General Motors is repairing 17,481 Canadian examples of the Cadillac SRX from the 2010-2015 model years because of the possibility of a loose nut in the rear suspension. For the moment, the automaker hasn't yet announced whether the CUV in the US would require a similar campaign.
The notice was dated September 18, 2014, on the website for Transport Canada, similar to the National Highway Traffic Safety Administration in the US. It says, "the rear suspension toe link jam nuts" might not have been sufficiency tightened, which could allow a rear wheel to turn "inboard or outboard" while driving. If this happens, it could cause a sudden change in handling. Canadian Cadillac dealers are inspecting the parts and replacing the toe link if necessary.
This campaign isn't listed on the GM's running recall tally from September, which includes exported models, but it does list four other campaigns for the SRX this year - three in this range of years and one for the 2004-2006 model. Autoblog reached out to the company to ask about the possibility of this recall expanding to the US and were told "We have not publicly announced US recalls" for the issues affecting the SRX. The New York Times was given a similar quote. Scroll down to read the notice from Transport Canada.

Why we can't have better headlights here in the U.S.

It wouldn't be a European auto show if we weren't teased with at least one mainstream vehicle we can't have here. At the Geneva Motor Show last week, the small but vocal contingent of shooting-brake buffs lamented that the Mazda6 wagon won't be coming to our shores, although they can take comfort in the fact that the vehicle won't get the torquey 250-horsepower 2.5-liter turbocharged gasoline engine we'll get here. Mercedes-Benz also announced a new headlight technology in Geneva that likely won't be available here anytime soon. It's just the latest in a long line of innovative and potentially lifesaving front-lighting solutions that the federal government doesn't allow in this country due to outdated standards — and a current lack of leadership at the U.S. Department of Transportation. Mercedes-Benz's new Digital Light system that debuted in Geneva uses a computer chip to activate more than a million micro-reflectors to better illuminate the road ahead. The Digital Light headlamps works with the vehicle's cameras, sensors and navigation mapping to adjust lighting for the given location and situation and to detect other road users. The Digital Light technology also serves as an extended head-up display of sorts by projecting symbols on the pavement ahead to alert drivers to, say, slippery conditions or pedestrians in the road. And it can even project lines on the road in a construction zone or through tight curves to show the driver the correct path. Digital Light will be available on Mercedes-Maybach vehicles later this year, although like any technology it's bound to trickle down to less expensive vehicles. That is, if we ever get it here in the U.S. Audi, a leader in automotive lighting, has repeatedly run into snags trying to bring state-of-the-art car headlights to the U.S. The German luxury automaker's recently introduced matrix laser headlight system, which performs many of the same trick as Mercedes-Benz's Digital Light, also isn't legal on U.S. roads. And five years after the introduction of its matrix-beam LED lighting, which illuminates more of the road without blinding oncoming motorists with brights by simultaneously operating high and low beams, Audi still can't bring that technology to the U.S. either.