1976 Cadillac Deville on 2040-cars

Auto blog

2020 Cadillac CT5 prototype shows off more lighting details

The elusive 2020 Cadillac CT5 luxury sports sedan has once again been spotted by a spy photographer. This time, we get to see it from all angles, whereas last time we only saw it from the front. It still has quite a bit of fake body work, and it's very clear Cadillac still hopes you'll think this is a Charger, from the big hood scoop to the fake full-width taillights. Digging past those misdirects, we can find some new details about the car. First, the car's front lighting has developed further. There are production-ready headlights fitted that appear to have some sort of LED illumination. These production lights also fit the shape we saw on the last prototype, so they'll end high up on the body, extending slightly horizontally toward the grille. There's still a section that extends back along the fender, seeming to bridge the gap between current Cadillacs and the Escala concept from which this car takes inspiration. Another addition are the vertical LED accent lights. This is another trademark feature of both current Cadillacs and the Escala, but they were absent from the last prototype we saw. We also get a look at some of the grille's details. Instead of slats, this CT5 has a plastic mesh of small rectangles. The pattern is reminiscent of brickwork. These photos also give us our first look at the back of the CT5. It looks like a fairly typical Cadillac. It's much more conservative than the front end. There are some angular cutouts in the bumper to allow exhaust gases out. The taillights have the current Cadillac look with the top curving over the rear fender. We can't tell if there will be a horizontal element like on the Escala, due to the fake lights. We're expecting the CT5 to be shown sometime next year in time for the 2020 model year. Odds are it will use off-the-shelf Cadillac engines including the turbocharged 2.0-liter four-cylinder, naturally aspirated 3.6-liter V6, and the twin-turbo 3.0-liter V6. Now that Cadillac has revealed its twin-turbo 4.2-liter V8, we'll be interested to see if that shows up in a future CT5-V. Related Video: Featured Gallery Cadillac CT5 prototype spy shots View 23 Photos Image Credit: SpiedBilde Spy Photos Cadillac Luxury Sedan cadillac ct5 cadillac escala

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Bronco Scout, Ford and Rivian, and next-gen Land Cruiser | Autoblog Podcast #578

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Road Test Editor Reese Counts and Assistant Editor Zac Palmer. First, they dicuss recent news, including the upcoming next-gen Toyota Land Cruiser, Ford's trademarking of "Scout" and "Bronco Scout," and Ford's $500 million investment in EV startup Rivian. After that, they talk about the cars they've been driving, including the Jeep Wrangler, Cadillac XT4 and Buick Regal GS. Last but not least, they help a listener choose a new car in our "Spend My Money" segment. Autoblog Podcast #578 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Toyota promises a next-generation Land Cruiser Ford trademarks "Scout" and "Bronco Scout" Ford invests $500 million in Rivian Cars we're driving: 2019 Jeep Wrangler 2019 Cadillac XT4 2019 Buick Regal GS Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: