1972 Cadillac Sedan Deville on 2040-cars

Auto blog

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

This 1969 Ford F-100 has a Cadillac CTS-V engine lurking underhood

Something always feels just a little taboo when someone builds a custom and then slots in a powertrain from a rival automaker. That's exactly the case with this modded 1969 Ford F-100 boasting a highly tuned LSA supercharged V8 like from the second-gen Cadillac CTS-V. However, with a claimed 800 horsepower on tap thanks in part to running an estimated 20 pounds of boost, it's easy to get over any bad feelings. Built by Tommy Pike Customs in South Carolina, the truck tries to keep the exterior looking somewhat stock. Although, the jade green and satin gold paint, Quaker State logo, lowered suspension and black wheels immediately suggest something is up. Once the F-100 starts up with its menacing growl, absolutely any doubts of this beast being unaltered are immediately gone. Not so obvious are some tweaks to actually help put all that power down, including disc brakes and independent suspension setups at the front and rear. The video gives some glimpses at a few of Pike's other creations, but the real star here is definitely his mean, green Ford.