1966 Cadillac Deville Convertable on 2040-cars

Auto blog

Cadillac calling in 4,900 CTS-V models for brake issue

General Motors is recalling just over 4,900 first-generation Cadillac CTS-V sedans built between September 6, 2003 and June 11, 2007. The affected vehicles are largely registered in cold weather states where rock salt is used on roads. The salt could corrode the front brake hose's fitting in the brake calipers, which could lead to a brake fluid leak, the National Highway Traffic Safety Administration's bulletin reads. Needless to say, that would make slowing down the Corvette-powered Caddy a challenge. The affected vehicles were registered and/or sold in the following states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia. GM is set to begin notifying owners of the affected vehicles, who will need to report to dealers to have both front brake hose assemblies replaced. Repairs are, naturally, free of charge. Scroll down for the official NHTSA bulletin. Report Receipt Date: APR 15, 2015 NHTSA Campaign Number: 15V225000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 4,907 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2004-2007 Cadillac CTS-V vehicles manufactured between September 6, 2003, and June 11, 2007, currently registered, or originally sold, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the front brake hose fitting at the caliper. CONSEQUENCE: Corrosion may cause the brake system to leak which could lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: GM will notify owners, and dealers will replace both front brake hose assemblies, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15149. Note: This recall is an expansion of recall 10V-105. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cadillac highlights craftsmanship in latest Escalade teaser videos

Cadillac, in case you haven't heard, is unveiling the new Escalade on October 7, completing the redesign of General Motors' large SUV range. The event is proceeding with the regular degree of "teasers" and "leaked images" that is typical of the automotive world, nowadays.
As the new Escalade's reveal date grows closer, Cadillac is trumping up interest for the new SUV, debuting five short teaser videos on its YouTube channel. While not showing much about the Escalade itself, the spots reveal plenty about its materials. Real wood and hand-stitched leather are highlighted, while we get another glimpse of the Escalade's vertically oriented headlights. Take a look below for all five spots.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.