1958 Cadillac Deville Resto Mod on 2040-cars

Auto blog

Cadillac confirms 420-hp twin-turbo V6 for 2014 CTS [w/videos]

The 2014 CTS will break cover next week at the New York Auto Show, but Cadillac has released a few details of what we can expect to find under the car's hood. As we saw in some spy shots back in January, the biggest news for the midsize Caddy will be a twin-turbocharged V6 producing a whopping 420 horsepower and 430 pound-feet of torque.
This LF3 engine will be paired to a new eight-speed automatic transmission, which will help balance performance and fuel economy. We still don't know how much the 2014 CTS has grown in terms of size and weight, but General Motors says that new sedan will return 17 miles per gallon in the city and 25 mpg highway with the new engine to go with a 0-60 mile per hour time of 4.6 seconds - that means the new CTS will have the fuel economy close to the current base model sedan and acceleration not too far from the current CTS-V. General Motors also confirmed that this twin-turbo V6 will be available in the 2014 XTS this fall.
The next-generation CTS will carry over the 3.6-liter V6 from the current car (likely as a base engine) and also add the 2.0-liter turbo four-cylinder from the ATS. Check out all the details on this new engine and watch a few videos (including GM's nifty tilt rig) by scrolling below.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Semi-autonomous Cadillac CT6 has Batman's seal of approval

Earlier this year, Cadillac pushed the launch of its Super Cruise semi-autonomous technology back to 2017, but it looks like the automaker is still hard at work testing the system on its vehicles. Our photographers snapped a CT6 sedan with what appears to be the Super Cruise technology in broad daylight. The CT6 in the pictures, ignoring the massive equipment on the car's roof, appears to be stock. The barely camouflaged vehicle has more sensors on the front fascia and a black rear bumper, but other than those points, looks normal. Getting back to the massive piece of equipment on the CT6's roof. There's no way to definitively state what it is, but there appears to be four cameras on the corners of the rack. A sensor or camera is also fitted to the right side mirror, which is slightly camouflaged. With all of the wires from the roof going into the vehicle, there's a chance that the massive blacked-out piece of equipment on the roof could be used to gather data. While the equipment looks extremely scientific, someone at Cadillac must have a sense of humor, or be a huge fan of DC Comics, as a Batman's logo is prominently displayed on the roof-mounted gear. Cadillac announced its Super Cruise semi-autonomous technology two years ago. The system will be able to speed the car up, keep the vehicle in its lane, and slow it down. The goal, in 2014, was to introduce the technology in two years (2016), but the automaker delayed the tech until 2017. Related Video: Featured Gallery Cadillac CT6 Super Cruise Spy Shots View 13 Photos Image Credit: Spied Bible / Brian Williams Design/Style Spy Photos Cadillac Technology Autonomous Vehicles Luxury Sedan cadillac ct6 Super Cruise