No Reserve!!!! Performance 3.6l Awd, Low Miles, Sunroof, Carfax 1-owner on 2040-cars

Auto blog

Recharge Wrap-up: Cadillac CT6 Plug-In on sale in China, Oregon utilities spur EV adoption

The Cadillac CT6 Plug-In is now available in China. The luxury plug-in hybrid sedan uses a turbocharged 2.0-liter engine plus two electric motors, which give the car a 0-62 mph time of 5.4 seconds. Its liquid-cooled 18.4-kWh lithium-ion battery pack gives the car an all-electric range of 50 miles, with a total range of 581 miles. Cadillac offers a 200V charger with the CT6 Plug-In, which provides a full charge in less than five hours. Owners can check charging status remotely using OnStar or the MyCadillac app. The CT6 Plug-In is offered in two variants, priced at about $80,400 and $94,800. Read more from GM. Two Oregon utilities are launching a program to increase EV adoption. Portland General Electric (PGE) will build six charging locations, each with up to four dual-standard fast chargers. PGE will also build and operate charging sites for electric buses, freeing up money for Portland's TriMet transit agency to spend on the actual buses. Pacific Power will also build public EV chargers, and lower some electricity rates for operators. Both companies will also work to inform the public about the benefits of electric mobility. Oregon utilities are required to stop using coal by 2030, and use 50 percent renewable energy by 2040, which will make EVs even cleaner. Read more at Green Car Reports. Continental says a shift to EVs will cost its company jobs. The automotive parts supplier's CEO, Elmar Degenhart, says that while the company will need to cut production jobs, those will be offset at least in part by the creation of new positions related to electric mobility. "There is enough time to design the process such that the blow is softened and major pain can be avoided," says Degenhart. Some 30,000 jobs at Continental are tied to combustion engines. Read more at Automotive News Europe. Featured Gallery 2017 Cadillac CT6 Plug-in Hybrid View 15 Photos News Source: GM, Green Car Reports, Automotive News EuropeImage Credit: Cadillac Green Hirings/Firings/Layoffs Cadillac GM Green Culture Electric Luxury recharge wrapup

Next Cadillac Escalade's interior spied for the first time

Update: Now that new spy photos of another large GM SUV have surfaced, we believe these shots show us a GMC Yukon interior, not a Cadillac Escalade. You can see the new spy shots here that depict a much more upscale vehicle interior compared to the fuzzy center stack shown in the shots of the Yukon. The new Cadillac Escalade has a lot of work to do in order to properly compete with Lincoln's wonderfully luxurious Navigator. These interior spy photos are our first look at what Cadillac is working with on the inside of its new luxury truck. We won't make final judgements, as this vehicle is still a prototype and subject to change. However, a few key bits are noticeable from the fuzzy photos. As expected, Cadillac's CUE infotainment and center stack is nowhere to be seen. Replacing it is a new interior design language, with a tablet-like screen that seems to rise out of the sloped stack on top. Below the screen is a strip of stitched leather and a couple prominently placed air vents. To the left of this area is what appears to be a push-button gear shifting system, replacing the column-mounted shifter currently in use. Below all that on a lower level of the center stack are all the climate controls, along with what look like physical buttons for what could be audio-related controls. Does it look as luxurious as the Lincoln? Not with all the coverings and shrouding it doesn't, which means we'll have to wait until we get the full picture. One thing that's clear is that the interior design is definitely going to be wildly different than the current Escalade. That center stack flows downward as one sloping piece into the high and bulky center console area. This design looks like it brings the center console further downward, and also uses a multi-tiered look. It's tough to read what's on the screen, but the software looks like the same stuff we got a preview of on the new Cadillac CT5 and CT4 sedans. As for the exterior shots, there's almost nothing that we haven't already gotten a taste of in previous spy photos. The independent rear suspension is a go, as are what appear to be massive headlight and LED DRL fixtures. If you look through the wrapping, you can make out how far up and down the lighting fixtures stretch ... or perhaps they're separate units altogether. It's tough to tell at this point.

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.