4dr Sdn Rwd W/1sa Cadillac Cts Rwd W/1sa Low Miles Sedan Automatic Gasoline 3.6l on 2040-cars

Auto blog

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

2020 Cadillac XT5 is barely being refreshed

Cadillac has been making a serious effort to expand its crossover offerings with the all-new XT4 and XT6. With them has come slight changes to Cadillac's design language, leaving the existing XT5 looking a little out of the loop. Well, it appears that's about to change ... sort of. One of our spy photographers caught a 2020 Cadillac XT5 out testing, and it has some changes that suggest a refresh. You do have to look closely to tell anything has changed, though. And even then, the only noticeable change is to the grille, which is now dotted with little quadrilateral shapes similar to those on XT4 and CT5. You can see one of the two current designs below. Otherwise, the bumpers and lights haven't been changed at all. View 21 Photos We suspect there will be other small changes in store for the crossover. It could switch from an eight-speed transmission to a nine-speed unit like the one the XT6 will use. This would be likely considering they both use the same V6 engine. We wouldn't rule out adding an optional turbo four-cylinder engine borrowed from the XT4, but that would be a fairly significant and less likely change. The interior could see some updates, and Cadillac could possibly try to shoehorn in its new infotainment system from the new batch of cars. Then again, changes could simply be limited to new materials and some extra features. With such a light update, we expect the updated 2020 XT5 will make its debut sometime this year with sales coming shortly after.

Junkyard Gem: 1976 Cadillac Eldorado Convertible

Convertibles rode high well in 1960s America, with Detroit selling more than 500,000 ragtops in 1965, but sales collapsed by the early 1970s and tightening federal crash-safety regulations made it seem less worthwhile to even bother producing new ones. Chrysler halted convertible production after 1971, with Ford following suit by 1973. By the 1976 model year, the Cadillac Eldorado was the last new American car you could buy with a convertible top from the factory, and it appeared that none would ever be built again. I've found one of those "last convertible" Eldorados in rough-but-identifiable condition in a Denver junkyard. As it turned out, the convertible never really died in America. Car shoppers could still buy new European-made convertibles after 1976, coachbuilders modified new Detroit cars with factory-grade drop-tops, and then Chrysler began selling K-Car convertibles starting with the 1982 model year. Because the '76 Eldorado appeared to be the absolute end of the convertible line, however, buyers thought they were investing in a sure-fire collector car that would be worth vast sums in the not-very-distant future (this belief led to lawsuits against GM later on, when the Cadillac Division resumed production of the Eldorado convertible for 1984). While a one-of-200-made Bicentennial Edition Eldorado with red-white-and-blue trim really is worth plenty these days, an ordinary 1976 Eldorado in beat-up condition doesn't seem worth restoring. This car appears to have sat outside in Colorado with the top down for decades, filling with snow each winter and enduring high-elevation solar irradiation each summer. A 1960s GTO or Camaro might be worth fixing up after falling into this state of disrepair, but not one of 14,000 "last convertible" Eldorados made in 1976. GM's Unified Powerplant Package front-wheel-drive system, which used battleship-strength chains to transmit power to the drive wheels, proved to be extremely reliable on the street, joining the small-block Chevrolet engine and Hydra-Matic transmission in the pantheon of The General's Greatest Engineering Hits. Even gigantic motorhomes used this system. In 1976, the Eldorado got the last of the 500-cubic-inch (8.2 liter, or litre as GM's marketers spelled it) V8s, rated at a disappointing 190 horsepower and an impressive 360 lb-ft of torque.