2014 Cadillac Cts Luxury on 2040-cars

Auto blog

2021 Cadillac XT6 adds 2.0-liter turbo and new base trim in second year

The 2021 Cadillac XT6 has been announced, and the three-row crossover is going through a few notable changes in its second model year. There’s a new base trim and base engine, and Cadillac has added tech features to improve the experience. Starting with the new engine: ItÂ’s the 2.0-liter turbocharged four-cylinder that was initially introduced in the XT4 as the base motor. Power output is the same as the compact crossover at 237 horsepower and 258 pound-feet of torque. ItÂ’s paired with the nine-speed automatic transmission and comes with front-wheel drive as standard — all-wheel drive is a $2,000 option. That engine only comes with the new base trim level: Luxury. Every other trim receives the 3.6-liter V6. The new Luxury trim (pictured above) is being added to the lineup as a base model to compliment the Sport and Premium Luxury trims. This will be the cheapest and most basic of the XT6s, but you can still option all-wheel drive. Features include 18-inch wheels, the eight-inch touchscreen infotainment system, black leatherette seats (heated and powered in front), brushed aluminum trim, tri-zone climate control and a number of other smaller extras along with a suite of driver assistance technologies. Cadillac is also adding wireless Apple CarPlay and wireless Android Auto to the lineup as standard equipment — they were standard previously but required the traditional wired connection. ThereÂ’s also a new 20-inch wheel for the Sport model, and three new color options: Dark Moon Blue Metallic, Wilder and Infrared Tintcoat. The XT6 LuxuryÂ’s base price is $48,990, including the destination charge. ThatÂ’s a fair cut below the 2021 Premium Luxury ($53,790) and the Sport ($58,190) trims, but you are losing out on the additional equipment and luxury those trims offer. Cadillac says the updated 2021 XT6 will land in dealerships this fall. Related video:

2019 Cadillac XT4 First Drive Review | Fashionably late

SEATTLE, Wash. — The 2019 Cadillac XT4 compact crossover debuted in New York, Cadillac's recently-adopted home, several months ago. Since then, a lot's changed. Cadillac honcho Johan de Nysschen got the boot, the economy's continued to improve, and we've changed coasts to experience the XT4. The setting is Seattle and its environs, a place that embodies the moment – a town flush with tech money and outdoor lifestyle experiences. Oh, and traffic. Lots of that. What hasn't changed is that this is a vehicle that Cadillac desperately needs. Between and below the Escalade and XT5 are vast gulfs of white space that could swallow entire crossover-focused brands. The dealers, we imagine, howled. And de Nysschen was replaced, it turns out, by a career GM exec with a penchant for building bridges with dealers. Must be a coincidence. The XT4 should please everybody involved in that power struggle. It's cute, for one, which will make for happier dealer-customer interactions. It brings appreciable but unintimidating technological advances to a brand looking to flex some segment leadership muscles. And it doesn't strictly feel like a rebadged version of a lower-tier product, a bad habit that Cadillac keeps failing to kick. We'll discuss its competition within its segment, and how they compare to the XT4, in another piece to follow. If you're wondering where the XT4 comes from, the easiest way to think about it is as a cut-down version of the basic underpinnings of the XT5, wrapped in nicely-proportioned sheetmetal. To be blunt, there's more unadorned plastic on the lower fascia and rockers than we'd like at this price point, but the rest is handsome. Large, elegant lamps sit at both ends, set off with trendy creasing and little accent vents – Sport models have clear taillight elements, while others have red-tinted lenses. The XT5, itself a newer vehicle, looks outclassed and dated instantly when put up next to its sleeker, more modern little sibling. The interior, however, is more alike than different. The major shapes are similar, as are the placement of the switchgear. The 8.0-inch infotainment screen is, as in the XT5, embedded in a slabby wedge of dash. It's still a touchscreen, but a little dial now provides an alternate way to navigate. A Qi charging panel and easily accessible, but not too prominent, USB, charging, and aux inputs reside just above. The seats in our tester, a Premium Luxury trim, are covered in a soft, warm caramel-colored leather.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.