2012 Cadillac Cts Base on 2040-cars

Auto blog

GM, Pilot will build EVgo fast chargers at 500 truck stops across U.S.

All of our maps showing electric vehicle charging stations across the U.S. are going to need an update. Today, General Motors, Pilot and EVgo announced plans to work together on a nationwide DC fast charging network. The plan calls for 2,000 charging stalls that can deliver up to 350 kW to be installed at up to 500 Pilot and Flying J travel centers in the U.S. The goal is to have DC fast chargers available in 50-mile intervals across the country. The new charging stations will feature GM's "Ultium Charge 360" branding and "Pilot Flying J" logos but will not be limited to drivers of GM EVs. The plugs will use CCS connectors and be available to anyone. GM EV owners can take advantage of benefits, including the ability to make exclusive reservations, get discounts on charging costs and streamline the charging process with Plug and Charge and in-vehicle apps that can provide real-time charger availability. The first installation phase will take place in 2023, and "the bulk of the installations" should be completed by 2025, EVgo CEO Kathy Zoi said during a conference call with reporters announcing the plan. "We're gonna get going immediately and commence all of that engineering and planning stuff," she said. "We've got a pretty orderly plan." Pilot CEO Shameek Konar said the company expects the new EV charging stations to coexist with the current fuel infrastructure. "An average Pilot Flying J location is about 10 acres," Konar said. "This will be in addition to all of our gas pumps. The way I think about it is, this is a new source of energy that is going to coexist with gas for quite some time. We can debate how long, but we need to serve both groups of customers." Installing DC fast chargers at hundreds of Pilot's travel centers — aka truck stops — means there should be food, drinks, restrooms, WiFi and even showers available while you wait for an EV to charge. Pilot recently announced its “New Horizons” plan that will invest $1 billion in upgrading Pilot travel centers with more premium amenities, including expanded seating and lounge areas. While the exact amount of time it will take to charge an EV using these new stations will vary on the EV and its current state of charge, most EVs can refill from a low state of charge to around 80 percent in 20-30 minutes on a fast charger. The new stations are future-proofed to deliver up to 350 kW, a charge rate that few EVs today can handle.

Cadillac Celestiq flagship EV shows off its tint-shifting smart roof

GM has high hopes for its upcoming Cadillac Celestiq sedan, slated for release in 2023. The flagship EV is being built to help the brand recapture its reign as “the Standard of the World.” As such, itÂ’s expected to arrive packed to the gills with cutting edge, futuristic technology including an all-glass roof that can adjust its opacity anywhere between crystal clear and completely opaque with the mere flick of a switch. These roofs, dubbed SPD-Smartglass, have been designed and manufactured by Research Frontiers of Woodbury, New York, and are based on Suspended Particle Device technology that was originally created as a replacement for the manual sliding window shades aboard commercial aircraft, Research Frontiers CEO Joe Harary told Engadget. Some of the earliest examples of SPD window treatments can be seen on the 2011 Mercedes Benz SLK roadster and in the 2012 Mercedes S Class coupe, which were used to increase headspace while eliminating the physical window shade screens, as well as various McLaren models over the past decade. As the YouTube video below explains, Research Frontiers SPD tech relies on polyiodide nanoparticles to generate its tint effect. Magic Sky Control Using SPD-SmartGlass Technology “SPD technology is smart glass that allows you to change the tint of the glass,” Harary explained. “There's this film that we invented that has little nanoparticles in it, which you can control with a small electrical voltage. So, basically this film... that allows you to dial in whatever tint level you'd like.”  “The crystals are about three to five tenths of a micron in length and they act as induced dipoles so when you apply an electric field to conductive coatings in the film,” Harary continued, “ the particles will line up, and allow light to pass through. Then, when you remove the voltage, their natural tendency is to be in the dark state due to Brownian movement and that causes the glass to tint.”  As the tint partially blocks incoming photons, it also reduces the amount of glare experienced by the driver and the heat trapped within the vehicle — over 99.5 percent of light and 95 percent of heat, per a January press release from the company. The claim is, this allows vehicle occupants to stay comfortable for longer without having to turn on the A/C, as well as keep the interior up to 18 degrees Fahrenheit cooler overall, Harary said.

2016 Cadillac CT6 to get an aluminum body?

Well this is interesting: A hot-off-the-press report in Automobile claims the coming Cadillac CT6 will have an aluminum body. Most write-ups on the CT6 claim it will have a body that's a combination of aluminum and high-strength steel - Automobile itself wrote of "high-strength steel, aluminum, and steel stampings" in October. An all-aluminum body would be quite the reversal, contradicting the last four months of reportage and company statements on the matter. Mark Reuss, EVP of global development at General Motors, told The Detroit News in October, "We will create with the CT6, the world's most advanced body structure... [and] it's not aluminum. It's a stronger, smarter, safer premium luxury vehicle." It echoed the earlier Automobile story in saying the CT6 would use GM's "patented welding technology with high-strength steel, aluminum and steel stampings and castings." That same month, the Wall Street Journal ran a piece titled, "GM Won't Follow Aluminum Strategy in Future Cars," in which Reuss said, "making big statements around all carbon fiber, all aluminum, all magnesium, they're very interesting," and that GM wouldn't be doing it. That piece also circled back to a material mix and GM's special welding process, saying the CT6 "will have a body made of aluminum, high-strength steel and other materials, and will be 100 kilograms (220 pounds) lighter than a similar-sized car made of high-strength steel." We don't know what kind of body Cadillac's new assault on luxury is going to wear, but now we can't wait to find out. Featured Gallery Cadillac Elmiraj Sedan: Spy Shots View 22 Photos News Source: AutomobileImage Credit: Chris Doane Automotive Cadillac GM Luxury Sedan aluminum cadillac ct6