2011 Cadillac Sedan on 2040-cars

Auto blog

Cadillac considering more radical ATS-V

Cadillac is stepping up its performance game with the launch of the new ATS-V and CTS-V, but it's not about to rest on the laurels it removed from its own badge. While it's tipped to launch additional V models in the future, the latest word is Caddy could also come out with an even more extreme version of the ATS-V in the near future. According to Car and Driver, the prospect is on the table: "We might have something down the road that is a little bit more aggressive," chief engineer Dave Leone said, while another source pegged its potential arrival for 2017. It's too early to say what would constitute the more extreme model. The magazine points toward the Mercedes-AMG Black Series as an example. Jaguar took a similarly extreme approach with the XKR-S GT, as BMW has with the M3 GTS. As it is, the ATS-V is offered in both coupe and sedan variants with a 3.6-liter twin-turbo V6 producing 464 horsepower channeled to the rear wheels through a six-speed manual. Cadillac reportedly considered employing a dual-clutch transmission and all-wheel drive, but went the old-school route to avoid excess weight and (no doubt) cost.

2020 Cadillac Escalade spied for the first time

Cadillac is expanding its crossover and SUV range with a new three-row XT6, but that doesn't mean it has forgotten about the one that started it all. As seen in the above photos, the company is testing a new version of the Cadillac Escalade. It's well-covered, but there are a number of details that we can make out. We'll get to what we can see of the design in a bit, but the big news is the suspension. Like the new Tahoe we previously spied, the 2020 Cadillac Escalade will have an independent rear suspension replacing the solid axle set-up that GM's full-size SUVs have always possessed. Its rivals from Ford/Lincoln went independent long ago. We can't underline enough how much of a difference this will make. Handling should be less cumbersome and the ride will be smoother and less prone to jiggling over bumps. It would be improved even further if Cadillac continues to offer magnetically controlled shocks as standard. Inside, the third-row should be positioned lower, thus lowering the current sky-high load height and resulting in a third-row that's actually habitable. In other words, the Escalade won't be so archaic. You can see the visual differences between the new (top) and current (bottom) designs below. Now, as for the design, our best clue to the new Escalade's design is in the grille. The flashy slatted chrome grille of the current model is gone and in its place a more modest mesh grille with little studs pushed to the front. It's very much like the grille found on the new CT6 and XT4. Also, like those two vehicles, the headlights appear to have more horizontal elements than the very vertical examples on the current Escalade. The rest of the SUV is harder to make out. The profile is very similar to the current one, and will surely be shared with the Chevy Tahoe and Suburban and GMC Yukon models. The rear features new rectangular exhaust tips nestled into the rear bumper. The taillights will likely continue to stretch up the rear pillars. Like the suspension, the Escalade will continue to be generally mechanically the same as the aforementioned Chevy and GMC versions, albeit with the best parts standard. The updated 6.2-liter V8 with Dynamic Fuel Management first introduced on the Silverado and Sierra will likely be the standard engine. It will then be paired with the 10-speed automatic transmission. With the new Navigator so widely impressing in reviews and in sales, this new Cadillac Escalade will have to step it up.

2020 Cadillac CT5 prototype shows off more lighting details

The elusive 2020 Cadillac CT5 luxury sports sedan has once again been spotted by a spy photographer. This time, we get to see it from all angles, whereas last time we only saw it from the front. It still has quite a bit of fake body work, and it's very clear Cadillac still hopes you'll think this is a Charger, from the big hood scoop to the fake full-width taillights. Digging past those misdirects, we can find some new details about the car. First, the car's front lighting has developed further. There are production-ready headlights fitted that appear to have some sort of LED illumination. These production lights also fit the shape we saw on the last prototype, so they'll end high up on the body, extending slightly horizontally toward the grille. There's still a section that extends back along the fender, seeming to bridge the gap between current Cadillacs and the Escala concept from which this car takes inspiration. Another addition are the vertical LED accent lights. This is another trademark feature of both current Cadillacs and the Escala, but they were absent from the last prototype we saw. We also get a look at some of the grille's details. Instead of slats, this CT5 has a plastic mesh of small rectangles. The pattern is reminiscent of brickwork. These photos also give us our first look at the back of the CT5. It looks like a fairly typical Cadillac. It's much more conservative than the front end. There are some angular cutouts in the bumper to allow exhaust gases out. The taillights have the current Cadillac look with the top curving over the rear fender. We can't tell if there will be a horizontal element like on the Escala, due to the fake lights. We're expecting the CT5 to be shown sometime next year in time for the 2020 model year. Odds are it will use off-the-shelf Cadillac engines including the turbocharged 2.0-liter four-cylinder, naturally aspirated 3.6-liter V6, and the twin-turbo 3.0-liter V6. Now that Cadillac has revealed its twin-turbo 4.2-liter V8, we'll be interested to see if that shows up in a future CT5-V. Related Video: Featured Gallery Cadillac CT5 prototype spy shots View 23 Photos Image Credit: SpiedBilde Spy Photos Cadillac Luxury Sedan cadillac ct5 cadillac escala