2008 Cadillac Cts, Auto, 3.6l, Rwd, 4dr, Traction Control,leather, Low Miles 52k on 2040-cars

Auto blog

Cadillac to ditch China-only LWB models for global 'right size'

We often think of Buick being General Motors' poster child in China, but would it surprise you to hear that Cadillac is just doing a bang-up job in the People's Republic? It's true, the Standard of the World is on fire, and it's doing so with a surprising group of buyers that are going to push through globe-spanning changes for the brand. Cadillac's average buyer age in the People's Republic of China is just 34. Yes, younger buyers dominate the Chinese market, but according to Reuters, Cadillac's young buyers want to drive and they don't want the typical businessman's German-badged sedan. Cadillac understands this, and is setting about to exploit it with a shift in its Chinese strategy. According to President Johan de Nysschen, the company will begin moving away from the China-only, long-wheelbase models, like the ATS-L. Instead, it will push for a global "right size" design, along with some stylistic changes. "You will see a softening of some of the hard edges, and more three-dimension styling on the side of the car," de Nysschen told Reuters, while noting that the cars will still be "instantly recognizable as Cadillac." Even without these changes, though, Cadillac has bucked the trend in China. At 17 percent, the company's sales exceeded the PRC's overall market growth of 7.3 percent by a significant margin. In fact, Cadillac's 2015 gains outpaced the overall market growth in China over the past three years, as the brand jumped to nearly 80,000 units. And the company is hoping to push that even higher, Reuters reports, with President Johan de Nysschen targeting a 25-percent increase in 2016. Related Video:

Cadillac Celestiq previewed as a flagship luxury electric car

Last year, our Autoblog Green editor, John Beltz Snyder, got a sneak peik of GM's upcoming electric car roll out. No photos were given, but he described them in great detail. Now we finally get our own peek at one of those cars, the Cadillac Celestiq flagship sedan. Sadly, we don't get a particularly clear look, since Cadillac is only teasing the car at this point, but it's better than nothing, and better than most teasers. We get a top-down shot that reveals the car will share some key cues with the Lyriq crossover EV. Most obvious is the rear with the boomerang taillights and fastback roof, which is a glass unit separated into four pieces. Each piece can be individually adjusted for transparency, and it appears they can be illuminated as well. The front also appears similar to the Lyriq with a geometric grille covered in a transparent panel. The grille looks significantly larger, though. It also features illumination like the crossover. We also get a look at the interior, which prominently features a full-width screen for instruments and infotainment. There appears to be a screen in the center console/stack that can control functions including the roof panel illumination. According to Snyder, the interior also has extensive wood and metal trim intermingling with nifty ambient lighting. Cadillac didn't say much about the mechanical aspects except the basics. It will use GM's Ultium battery technology that will be shared with other products such as the aforementioned Lyriq and the GMC Hummer EV. It will also feature four-wheel steering as well as all-wheel-drive, undoubtedly courtesy of dual motors, one front and one rear. Cadillac previously confirmed that the Celestiq is headed for production. We also suspect that some of the fancy features such as the screens and multi-panel glass roof could make it to production. This is because it's meant to be a halo product showing off the ultimate in luxury and technology from the brand, and it could have a price tag larger than $200,000. We're expecting Cadillac to fully reveal the Celestiq in a few months, but it could be a while before the production version hits the road. The Lyriq isn't going on sale until late next year, and we would bet the Celestiq wouldn't come ahead of it. Related Video:

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.