2007 Cadillac Cts Base Sedan 4-door 2.8l on 2040-cars

Auto blog

2015 Cadillac ATS Coupe prepares to fight BMW 4 Series

Cadillac introduced its new ATS Coupe at the 2014 Detroit Auto Show today, bringing customers an alternative to the growing range of sport luxury coupes typified by the BMW 4 Series, Audi A5 and Mercedes-Benz C-Class Coupe.
The ATS Coupe, as a slightly more premium offering, ditches the wheezy 2.5-liter engine found in the basic ATS Sedan, but retains the four-door's 2.0-liter, turbocharged four-cylinder and 3.6-liter V6. That four-pot turbo benefits from a fettling that has increased torque from 260 pound-feet to 295, although its peak is only available from 3,000 rpm to 4,600 rpm, unlike in the sedan, where peak twist arrives at just 1,700 rpm and sticks around until 5,500 rpm.
Power can be channeled to either the rear or all four wheels by the owner's choice of a Tremec six-speed manual or a six-speed automatic transmission. According to Cadillac, the new Coupe can get to 60 in 5.6 seconds when fitted with the 2.0-liter turbo.

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.

GM investing $2 billion in Tennessee plant to build Cadillac Lyriq, other EVs

DETROIT — General Motors said on Tuesday it will invest $2 billion to convert its Spring Hill, Tennessee, factory to produce electric vehicles, starting with the new Cadillac Lyriq, alongside existing combustion-engine Cadillacs. Spring Hill will be GM's third U.S. electric vehicle factory, along with existing plants in Detroit and Orion Township, Michigan. The Tennessee plant was built in 1990 as the exclusive source for GM's now-defunct Saturn brand. The Cadillac Lyriq crossover is slated to go into production in Spring Hill in late 2022, according to AutoForecast Solutions (AFS), which tracks industry production plans. AFS said it expects some electric vehicle production will be announced at a later date for a factory in Mexico. Among additional investments, GM on Tuesday said it will spend $32 million at its truck plant in Flint, Michigan, to increase production of the Chevrolet Silverado and GMC Sierra heavy-duty pickups. GM will spend $100 million to shift production of the redesigned GMC Acadia crossover from Spring Hill to a plant near Lansing, Michigan. Spring Hill will continue to build the gas-engine Cadillac XT5 and XT6 crossovers. The plant also will build other future electric vehicles in addition to the Lyriq. The automaker's plans for investing in U.S. factories comes with two weeks left in the U.S. presidential election campaign. President Donald Trump and Democratic rival Joe Biden are competing for support from auto workers in Midwestern swing states. GM Chief Executive Mary Barra has outlined plans to invest $20 billion by 2025 in new electric vehicles and battery technology. The automaker is spending $2.2 billion to overhaul and retool its Detroit-Hamtramck factory to build a GMC Hummer EV electric pickup truck in late 2021, followed by an automated robotaxi and other electric vehicles. GM builds its electric Chevrolet Bolt at a large assembly plant north of Detroit.