09 Cts Awd 1sb Premium Collection Navigation Ultraview Roof Xenon Xm One Owner on 2040-cars

Auto blog

The CadMad shooting brake Eldorado Brougham-Nomad cross is up for auction

The CadMad custom 1959 Cadillac Eldorado Brougham is the coolest car crossing the block at the Scottsdale Barrett-Jackson auction. All arguments to the contrary are wrong and can be redirected straight to the gallery above. This 16-year project built by Super Rides and commissioned by the late Steve Barton won the Don Ridler Memorial Award at the 2019 Detroit Autorama, which goes to the custom build that shows the best creativity, engineering and quality workmanship. All of those qualities are on full display in this Eldorado Brougham-Nomad mashup. Just so we’re all on the same page, a 1959 Cadillac Eldorado Brougham was no normal Cadillac at the time. The sedanÂ’s exterior design is thanks to Pininfarina, as Cadillac had the Italian design company tweak its styling. It resulted in a much more subdued Cadillac than the rest of Caddy's giant fin-tastic designs of the decade. Only 200 were made over the course of a couple years, and they remain some of the rarest production Cadillacs to this day. The “Fawntana Rose” Cadillac standing before us is a shooting brake interpretation of that famous sedan. It has lost 18 inches in overall length, four inches in width and the rear doors have been completely eliminated. A Chevy Nomad roof was shortened by a couple inches and grafted onto the bodywork. The builders say that every last piece of sheet metal was modified for this build. Still, thereÂ’s still no mistaking it for a Cadillac. The chrome bumpers and lights were left mostly untouched, and the small fins were retained, as well. That Nomad roof was painted in Titanium Silver for contrast, the same silver thatÂ’s used on the new Ford GT. Things only improve when you open the hood. A 632-cubic-inch twin-turbo V8 built by Nelson Racing Engines (NRE) powers the shooting brake. Most of the time (on 91 octane fuel), it produces around 1,000 horsepower and 950 pound-feet of torque. Feed it 112 octane fuel and NRE claims itÂ’s capable of producing upwards of 2,500 horsepower. Yowza. A four-speed automatic transmission and strengthened Corvette transaxle somehow attempts to put the power down to the rear wheels. The seats are reflective of the amount of power this car puts down — 2012 Cadillac CTS-V buckets were used and modified with mauve-colored upholstery. All the trim was hand-painted, including the wood-grain flooring in back and is meant to “mimic the African Wenge and Tigerwood Maple.”  The time and effort that went into this built is truly astounding.

Why we can't have better headlights here in the U.S.

It wouldn't be a European auto show if we weren't teased with at least one mainstream vehicle we can't have here. At the Geneva Motor Show last week, the small but vocal contingent of shooting-brake buffs lamented that the Mazda6 wagon won't be coming to our shores, although they can take comfort in the fact that the vehicle won't get the torquey 250-horsepower 2.5-liter turbocharged gasoline engine we'll get here. Mercedes-Benz also announced a new headlight technology in Geneva that likely won't be available here anytime soon. It's just the latest in a long line of innovative and potentially lifesaving front-lighting solutions that the federal government doesn't allow in this country due to outdated standards — and a current lack of leadership at the U.S. Department of Transportation. Mercedes-Benz's new Digital Light system that debuted in Geneva uses a computer chip to activate more than a million micro-reflectors to better illuminate the road ahead. The Digital Light headlamps works with the vehicle's cameras, sensors and navigation mapping to adjust lighting for the given location and situation and to detect other road users. The Digital Light technology also serves as an extended head-up display of sorts by projecting symbols on the pavement ahead to alert drivers to, say, slippery conditions or pedestrians in the road. And it can even project lines on the road in a construction zone or through tight curves to show the driver the correct path. Digital Light will be available on Mercedes-Maybach vehicles later this year, although like any technology it's bound to trickle down to less expensive vehicles. That is, if we ever get it here in the U.S. Audi, a leader in automotive lighting, has repeatedly run into snags trying to bring state-of-the-art car headlights to the U.S. The German luxury automaker's recently introduced matrix laser headlight system, which performs many of the same trick as Mercedes-Benz's Digital Light, also isn't legal on U.S. roads. And five years after the introduction of its matrix-beam LED lighting, which illuminates more of the road without blinding oncoming motorists with brights by simultaneously operating high and low beams, Audi still can't bring that technology to the U.S. either.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.