2018 Cadillac Xts Coachbuilder Limo-edition(ambruster Stageway) on 2040-cars

Auto blog

2014 Cadillac CTS images leak from somewhere

The redesigned 2014 Cadillac CTS will be unveiled this Tuesday on the eve of the New York Auto Show, but as often happens, some images of the car have leaked onto the web a few days early. Previously, the only information we had on the 2014 CTS concerned the all-new twin-turbo V6 engine that will be found underhood, rated at 420 horsepower and 430 pound-feet of torque.
While none show the new car in its entirety, the images do show much of the front end, particularly the headlights that feature vertical bars of LEDs that start down low as foglights and continue up to the top of the front fenders. They're similar to the lighting design first shown on the XTS and ATS, except the lower portions are much taller.
There are also views of the rear end and one of the taillights, as well as an interior shot of the front passenger door. The latter image has us most intrigued, as it shows some very high end materials being used in the new CTS interior. The low-gloss wood trim, in particular, looks very premium.

2020 Cadillac CT5-V, CT4-V to be revealed next week

Even though the ATS-V and CTS-V are on the way out, the future is looking bright for Cadillac's high-performance sub-brand. Why is that? Well we're going to see not one, but two all-new V models on May 30. The company revealed its plans to show the 2020 Cadillac CT5-V and the CT4-V in an announcement about 15 years of the V brand. Not much is known about either car, but both should be wickedly quick based on their predecessors. We're particularly curious as to what engines will be used. With the CT5-V, a return of a supercharged pushrod V8 seems possible considering the CT5 is based on the Alpha platform that also underpins the Camaro. But Cadillac may want to push its more unique powertrains such as the twin-turbo, double-overhead-cam 4.2-liter V8 in the CT6-V. In the CT6-V, it makes 550 horsepower and 627 pound-feet of torque. Cadillac's former CEO said that other cars getting the engine will have it 500 horsepower and 553 pound-feet of torque. We think the company could get away with the full power in the CT5-V, though, since each car's mission and character is different. There's also a slim chance we could see a return of the manual transmission for the midsize sports sedan, based on what a Cadillac engineer said. As for the CT4-V, there are more questions, simply because we haven't even seen the regular version yet except in spy shots. Since the CT5 is built off the Alpha platform, it seems reasonable to think the CT4 will do the same, especially since the ATS also used the platform. And to leave space between the CT5-V and itself, using a hot version of the twin-turbo 3.0-liter V6 seems like the most likely choice. The hot V6 in the ATS-V made 464 horsepower and 445 pound-feet of torque, so we would expect the same. Hopefully Cadillac will offer a manual with it again. One final note from the Cadillac V announcement also got our attention. It said that these two cars are "just the beginning." That seems a pretty obvious sign there are other V models in the works. Since the CT4 and CT5 will round out the company's car line, the logical next choice would probably be crossovers. It will be interesting to see what an XT4-V or XT5-V will be like, especially since they use front-drive platforms. But in the meantime, we'll look forward to Cadillac's hot sedans.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.