2020 Cadillac Xt5 on 2040-cars

Auto blog

How GM's grueling 24-hour test gets the kinks out of its performance cars

One of the biggest challenges automakers face when designing a high-performance car is making sure that it is both fast and reliable. For General Motors, any car that might be taken to the track by its owner - like the Corvette, Camaro Z/28 (shown above) and the Cadillac CTS-V, for example - undergoes a rigorous and strenuous 24-hour test by engineers at the Milford Proving Grounds, as pointed out by Car and Driver.
We've posted on this topic in the past - on a video showing the Camaro ZL1 being brutalized, for instance - but this article gives a more in-depth look at what actually happens behind the scenes... including what that poor ZL1 went through. Though the test isn't for 24 hours straight, the cars are pushed as hard as possible by some of GM's best drivers with only the brakes and tires replaced frequently.
We don't want to ruin the fun for you, but it is an interesting article that tells just some of what GM does to develop its sports cars. Check out the full article over at Car and Driver for the rest of the story.

2013 Cadillac ATS 3.6 AWD

All-Wheel, All Right
There is no escaping the luxury all-wheel drive empire Audi has built for itself over the past 15 years. While nearly every high-end marque has at least one offering with power at all four corners, the hardware can't help but play second fiddle to Ingolstadt's Quattro kingdom. Leather-lined all-wheel drive is simply Audi the way minimum wage is an English degree. But General Motors seems hell-bent on raiding as many established fiefdoms as possible with the 2013 Cadillac ATS. Engineers and designers made no secret of the fact that the baby Cadillac was penned specifically to take on the BMW 3 Series, but Audi should be no less concerned about the newest luxury prince from Detroit.
GM has been stuffing all-wheel drive systems under their vehicles for years, but the effort hasn't come without nasty side effects. Unfortunate understeer, extra ride height, smallish wheels and porky curb weight meant opting for all-wheel drive was like signing your driving pleasure's death warrant. Would you like polished brass or brushed nickel hardware for your right foot's coffin, sir?

Cadillac teases CT4 and CT5 V-Series Blackwing steering wheel

There's quite a bit that we know about the upcoming Cadillac V-Series Blackwing models. Thanks to spy shooters and prototypes, we've seen the CT4-V and CT5-V Blackwing out and about testing on public roads, which means we've seen the bronze wheels in staggered sizes. We've been told they will offer proper manual transmissions, and we know they will lap a race track quicker than the ATS-V and CTS-V they replace. And now we know what their steering wheels will look like. It's not much to base an entire teaser on, but there are a few interesting tidbits we can glean from Caddy's first official Blackwing tease. First, the wheel itself. It's leather wrapped (not Alcantra, at least on this example), it looks to have meaty bulges where you'll want to grip it, it has a red strip at the top to help locate straight ahead while driving aggressively, and it has a carbon fiber V-shaped spoke at the bottom. Finally, we see a prominent silver button labeled "V" on the left side that will allow drivers to quickly access V-Mode. To the right will be buttons for the Performance Traction Management system. Judging by the fuzzy background behind the wheel that shows some sort of digital gauge cluster, it seems that Cadillac may be aiming for a 200-mile-per-hour top speed for the CT5-V. That's not a stretch, as the last-generation CTS-V could hit that speed, too. Cadillac smartly took this shot in a way that blurs the center console, which means there's plenty more time to speculate on the transmission choices. Cadillac says the V-Series Blackwing models will be ready in time for the summer of 2021. Stay tuned. Related Video: