2008 Cadillac Xlr Base Convertible 2-door 4.6l -$9900 on 2040-cars

Auto blog

Cadillac recalls 17,500 SRX CUVs in Canada

When reporting on recalls, Autoblog generally tries to focus on the US market. However, a recent campaign in Canada seems important enough to be worth mentioning because it could eventually affect American drivers. General Motors is repairing 17,481 Canadian examples of the Cadillac SRX from the 2010-2015 model years because of the possibility of a loose nut in the rear suspension. For the moment, the automaker hasn't yet announced whether the CUV in the US would require a similar campaign.
The notice was dated September 18, 2014, on the website for Transport Canada, similar to the National Highway Traffic Safety Administration in the US. It says, "the rear suspension toe link jam nuts" might not have been sufficiency tightened, which could allow a rear wheel to turn "inboard or outboard" while driving. If this happens, it could cause a sudden change in handling. Canadian Cadillac dealers are inspecting the parts and replacing the toe link if necessary.
This campaign isn't listed on the GM's running recall tally from September, which includes exported models, but it does list four other campaigns for the SRX this year - three in this range of years and one for the 2004-2006 model. Autoblog reached out to the company to ask about the possibility of this recall expanding to the US and were told "We have not publicly announced US recalls" for the issues affecting the SRX. The New York Times was given a similar quote. Scroll down to read the notice from Transport Canada.

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.

2020 Cadillac XT5 makes its official debut, adding a new engine and improved tech

The 2020 Cadillac XT5 is here, and it’s new in some significant ways. To start, it gets a slightly revised look. We got a preview of it a month ago when Cadillac revealed the car in China, but these are official U.S.-specific photos now.  YouÂ’re looking at pictures of the XT5 Sport and Premium Luxury here. We mention this because Cadillac is continuing in its “Y” trim strategy of offering a Luxury, Premium Luxury and Sport version of their cars with noticeable design differentiation between each one. The Sport gets a darker appearance package with the XT4-like grille, as opposed to the Premium Luxury that is set to emphasize bright trim (i.e. chrome).  WeÂ’re expecting a noticeable change in the driving experience for the 2020 XT5, as the new base engine is the 2.0-liter turbocharged four-cylinder that debuted in the XT4. ItÂ’ll be making 237 horsepower and 258 pound-feet of torque in this application, just as it does in every vehicle GM is spreading it to. The 3.6-liter V6 is standard on the Sport (optional on Premium Luxury), and continues to make 310 horsepower and 271 pound-feet of torque. Both engines are paired with nine-speed automatic transmissions now — the V6 was paired with an eight-speed previously.  Cadillac has also spent some time with the suspension, giving the non-Sport trims “revised front struts and driveline enhancements to improve ride comfort and road isolation.” We like the sound of that. Then, the Sport trim is legitimately sportier than the Luxury trims. Cadillac has fitted its continuous damping control adaptive suspension, given it quicker steering, standard all-wheel drive and standard 20-inch wheels. All that should make it slightly more lively through the twisties. A smattering of tech updates are coming onboard for 2020. Cadillac added its rotary controller that lets you control the updated infotainment system via that device or through the touchscreen. Available wireless phone charging, revised USB ports and USB Type-C ports come on the 2020 XT5. Then youÂ’ll notice new interior color and trim gracing the interior surfaces, as well. Cadillac says there are more “authentic materials” than before, so hopefully that means less plastic. What Cadillac made no mention of in its release, is Super Cruise. ItÂ’s going to be coming to the recently revealed CT5 and CT4-V sedans, but Cadillac doesnÂ’t seem particularly keen to get it on the crossovers yet.