2007 Cadillac Xlr on 2040-cars

Auto blog

2018 Cadillac CT6 Drivers' Notes | Super Cruiser

The 2018 Cadillac CT6 showcases General Motors' impressive Super Cruise feature. It's the next milestone on the way to an autonomous future, though GM is being conservative about promoting Super Cruise's considerable prowess. It helps the driver, GM says. Does it work? Our editors have been testing one this week as the calendar turns and the temperatures drop in Michigan. Also, the CT6 is a really nice car. Here's what we think. Senior Editor, Green, John Beltz Snyder: Super Cruise, man. On Wednesday night, I rode home in a 2018 Cadillac CT6 with Super Cruise. I say "rode," but I was sitting in the driver's seat. I spent more time with my hands off the steering wheel than on it. It was super relaxing. Once I got on the highway, I set the cruise control, waited for the steering wheel icon to show up on the instrument cluster, and hit the button on the steering wheel that looked like a steering wheel (pretty meta, to be honest). The top section of the wheel illuminated in a green arc, and I felt the weight of the steering lift as the car began driving itself. I put my feet flat on the floor, rested my hands on my knees, and just watched the road while listening to a podcast ("The Dollop," if you were wondering). To be honest, I had trouble concentrating on the audio, as my thoughts were captivated by the way the car managed the road and traffic around me. Sure, I had to change lanes on my own and take over steering on interchanges and surface streets, but when the AI took the reins, it had my complete confidence. Perhaps just as surprising, the CT6 was also a blast to drive manually. It felt super smooth, with plenty of power and poise. I enjoyed bending it through 50-mph curves almost as much as I enjoyed being driven. Almost. Editor-in-Chief Greg Migliore: Super Cruise just works. I was blown away how easy it was to use and how well it just did what it was supposed to do. Merging into the teeth of rush hour traffic in metro Detroit, I braced for the worst. I figured I'd be stuck in bumper-to-bumper gridlock and Super Cruise would never get deployed. Frankly, I was cynical Super Cruise would work. But then I was able to hit the 70-mph speed limit and figured, well, let's just see about this thing. Like John, I did the two-steps to set up SC, and boom, it worked. It trailed the cars in front of me at a proper distance. It braked naturally to a stop and then resumed speed. It slowed down when a Jeep Grand Cherokee cut me off.

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Cadillac president de Nysschen says electrification coming 'across the spectrum'

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video: