Runs Like A Dream,very Good Condition Inside And Out,very Thing Works,all Power on 2040-cars

Auto blog

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Combine a self-driving car with V2V, and here's what happens

Transportation engineers have started laying the groundwork for a traffic world in which cars communicate with other cars and infrastructure like bridges and traffic lights. How about an environment in which cars talk to pretty much everything and everyone? In a preview of its offerings at the upcoming Consumer Electronics Show, Delphi Automotive will deploy just such a concept. Engineers have designed a system that communicates with traffic signals, street signs, pedestrians, cyclists, even to fry pits and parking garages along a driver's route. To date, engineers and researchers across the auto industry have focused on the technical and safety-oriented foundation of future vehicle-to-vehicle communications, which could help cars share information about everything from traffic tie-ups to upcoming road hazards. Beyond those building blocks, many have projected that V2V could also include more consumer-focused features. Delphi's system, dubbed V2Everything, might be the first that combines those sorts of features in a tangible package. At CES in Las Vegas, scheduled to begin the first week of January, company officials say they'll demonstrate in real-world conditions how V2V technology can be used in an autonomous vehicle to provide a range of critical safety information and leisure and convenience options for riders. The first V2V technology installed on a production car is slated to appear on the 2017 Cadillac CTS. "We imagine a world with zero traffic accidents," said Jeff Owens, Delphi's chief technology officer. "To get there, we will need a convergence of active safety, sensor fusion, connectivity platforms and advanced software." Such software might allow a vehicle to start searching for and reserving parking spots at a programmed destination long before arriving. It could allow riders to place their McDonald's drive-through order from the road and have the food ready for pickup along the route. For the drive itself, the Delphi-equipped car can stay updated on the status of traffic lights around Las Vegas, and can anticipate yellow and red lights. Using smart-phone technology, the car can detect pedestrians and cyclists that may otherwise be hard to see. It can send messages to friends or family to notify them of a driver's location. Some of those features have been available on third-party apps or individually developed by automakers. But this system marries them together in a single system that is tailored for use in self-driving cars.

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.