Only 38k Estate Fresh Barn Find Cold A/c Just Serviced Drives Fantastic!! 40 Pix on 2040-cars

Auto blog

Cadillac CT6 gets a plug in Shanghai, will come to US

Don't call it the third coming of the Chevy Volt. The unsurprising debut of the Cadillac CT6 PHEV in Shanghai today has a powertrain that sounds an awful lot like the one that can be found in the Volt and the Cadillac ELR. The plug-in CT6 – identical to the CT6 that debuted in New York earlier this month – has an 18.4-kWh lithium-ion battery (just like the 2016 Volt) and offers an all-electric range of around 37 miles. It also copies the "Regen on Demand" feature from the new Volt and the battery cells "use the latest generation cell chemistry found in other GM plug-in vehicles." But Cadillac President Johan de Nysschen doesn't see the two powertrains as similar in at least one important way. General Motors calls the Volt and the ELR "extended range electric vehicles" (EREV) but in a statement, de Nysschen says that the plug-in hybrid CT6 is, "an ideal platform for Cadillac to offer its first plug-in hybrid." That GM is using the PHEV terminology rather than EREV is going to be important to some, even if the practical difference is only semantic. And yes, we all understand the irony of de Nysschen – the same guy who has a history of speaking ill of plug-in cars – hyping them now. Back when he worked for Audi, he said the original Volt was too expensive for what it offered and was thus, a car for "idiots." Speaking in Shanghai today, de Nysschen said the new CT6 PHEV was, "an EV without any of the disadvantages or range constraints," according to Automotive News. If the batteries are similar to GM's other EREV/PHEV cars, the CT6 powertrain is at least different. The ELR uses a 1.4-liter engine, while the new Volt has a 1.5-liter four-cylinder mill. The CT6, on the other hand, has a 2.0-liter turbo four-cylinder engine with direct injection. There is also an "all-new rear wheel electric variable transmission (EVT) with exclusively designed motors," that will give the CT6 PHEV, "smooth, spirited acceleration." The EVT is a two-motor-unit that uses three planetary gears. Maximum overall system output is 335 horsepower and 432 pound-feet of torque. Perhaps most interesting for American audiences is the fact that GM's press release, available below, makes multiple references to US-market sales of the PHEV. Official details on the EV range and fuel economy will be made available closer to the car's US launch.

GM alerting truck and sedan owners to a do-over on brake recall

A recall campaign intended to address issues with braking systems on certain 2019 General Motors trucks and sedans may have introduced a new issue, the automaker has acknowledged, and thousands of owners driving repaired vehicles may need to return to their service departments for another update.  The update addresses a fix that was pushed out to owners of more than half a million brand-new GM trucks and sedans that could potentially lose partial braking function, according to the Detroit Free Press. The original software fix helped address situations where the vehicles' anti-lock braking systems would become disabled, which in turn would prevent electronic stability control from activating. Vehicles subject to the recall would often experience software glitches that prevented them from properly communicating the operational state of these systems, meaning drivers would have no idea that their brakes may not behave as expected in an emergency. The 2019 Chevrolet Silverado 1500, Cadillac CT6, and GMC Sierra 1500 were all recalled in the original campaign.  Unfortunately, the early version of this fix appears to have introduced yet another software glitch, indicating that the original fix did not do the trick. Those who have not yet had their cars serviced can rest easy; they will only receive the most up-to-date version of the software fix.  Related video    

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.