2003 Cadillac Seville Sts Sedan 4-door 4.6l on 2040-cars

Auto blog

Cadillac's Super Cruise — look, Elon, no hands!

Cadillac is about to start selling vehicles with an autonomous driving mode and TechCrunch got an early look at the technology in a production car. "Wait for the green light and let go," the Cadillac engineer instructed. That's it. The car was driving itself. I, the person behind the steering wheel, was no longer the driver. Cadillac's Super Cruise system was driving. The 2018 Cadillac CT6 sped along U.S. 23 under the direction of Super Cruise. Traffic was light and the weather was perfect. The system held the Cadillac sedan in lane and responded appropriately to traffic. I spent an hour on the expressway and touched the steering wheel and pedals only a few times. Super Cruise made the drive boring. I think that's the point. Here's how it works Super Cruise is available once the driver navigates the vehicle onto an expressway. When ready, a little icon is displayed by the speedometer and the driver hits a button on the steering wheel to switch it on. Once the light bar on top of the steering wheel turns green, the driver can let go. Super Cruise is driving.This steering wheel light bar is key to the operation. When green, the driver knows Super Cruise is in control. Blue means the driver interrupted the system to change lanes and red means Super Cruise needs the driver to confirm they're paying attention and not checking Twitter. When active, Super Cruise controls the steering and speed, but again, only on an expressway. This is done through onboard sensors and using GPS and mapping data. GM employed GeoDigital, a startup in GM Venture's portfolio, to map 160,000 miles of expressways in the U.S. and Canada. The car company then used Super Cruise-equipped vehicles to test each mile. This combination of onboard systems combined with map data makes the system feel polished and sophisticated. During my admittedly limited time in the vehicle, the CT6 precisely held its position in the lane and confidently handled sweeping curves at speed. There was no wiggling or squirming — from the Cadillac or myself. The car was in control, and I felt safe. Although the driving conditions were perfect for my test ride, during adverse weather, the system will work normally until one of the key systems is unable to operate.

Lego's 18.5-inch Ghostbusters Ecto-1 will make you feel like bustin'

If there's something strange in your neighborhood, Lego has something to help you take care of those non-terminal repeating phantasms or class-five full-roaming vapors. This week, it announced a supremely detailed version of the Ecto-1, the iconic 1959 Cadillac Miller-Meteor ambulance from the 1984 film classic, Ghostbusters. The set is comprised of a whopping 2,352 Lego pieces and when completed, will measure 18.5 inches long. It's one of the more accurate Lego vehicles the company has created, and features a steering box connecting the steering wheel to the front wheels, hinged doors and an opening hood with replica V8 engine inside. Like the movie car, it's packed with ghost-fighting gadgetry. There's a rotating ghost-sniffer activated by the wheels, a gunner seat that deploys from one of the rear doors, and a roof rack stacked with loads of spirit-trapping gear. Lego says it's even got some easter eggs that will be discovered as the kit is assembled. Lego says that two automotive pieces were developed specifically for the Ecto-1: a 6x14 curved windscreen and a five-module steering wheel. These should translate well to other vehicles in the future or for custom builds. Notably, this kit was designed by the Michael Psiaki, who created Lego's James Bond Aston Martin DB5 kit. The set is released as a tie-in with the upcoming Ghostbusters: Afterlife movie. It was supposed to be released this summer but was delayed until (as of now) June 2021 as a result of the COVID-19 pandemic. As for the Ecto-1 kit, it will hit shelves Nov. 15 just in time for holiday shopping.

2014 Cadillac CTS images leak from somewhere

The redesigned 2014 Cadillac CTS will be unveiled this Tuesday on the eve of the New York Auto Show, but as often happens, some images of the car have leaked onto the web a few days early. Previously, the only information we had on the 2014 CTS concerned the all-new twin-turbo V6 engine that will be found underhood, rated at 420 horsepower and 430 pound-feet of torque.
While none show the new car in its entirety, the images do show much of the front end, particularly the headlights that feature vertical bars of LEDs that start down low as foglights and continue up to the top of the front fenders. They're similar to the lighting design first shown on the XTS and ATS, except the lower portions are much taller.
There are also views of the rear end and one of the taillights, as well as an interior shot of the front passenger door. The latter image has us most intrigued, as it shows some very high end materials being used in the new CTS interior. The low-gloss wood trim, in particular, looks very premium.