1985 Cadillac Seville Base Sedan 4-door 4.1l on 2040-cars

Auto blog

Cadillac issues stop sale on ATS to recall 82k units

Cadillac is issuing a recall on 82,620 examples of the 2013-2016 ATS worldwide to fix a compliance issue with the sunroof controls. Until a service bulletin goes out to take care of things, there's also a stop sale on the luxury compact in the United States, The Detroit News reports. Of the affected models, 63,665 are in the US, according to a statement sent to Autoblog, and 7,922 of them are in Canada. The problem is actually the same issue as a recall on nearly 59,000 examples of the 2013-2015 ATS in the US in February. In them, the controls for the tilt and slide of the roof aren't recessed enough to meet government standards for the force necessary to operate the buttons. The Feds believe that someone could accidentally activate the auto-close and potentially be at risk. At the time, Cadillac dealers installed a new trim plate to add the needed clearance. In the latest update, the company is adding the 2016 model year, and according to The Detroit News, 70 percent of the cars from the original campaign also need another new trim plate. Unsurprisingly for such a minor defect, there are no known crashes, injuries, fatalities, or customer complaints related to this issue, according to the announcement by General Motors. Cadillac ATS Statement: General Motors is recalling 63,665 Cadillac ATS sedans in the United States from the 2013-2016 model years because the power-operated roof panel systems on these vehicles will auto-close when the non-recessed portion of the "Slide" or "Tilt" switches are pressed and the roof panel is open. Because these switches are not fully recessed, they can be actuated with less force than required to comply with applicable federal standards. GM knows of no crashes, injuries or fatalities related to this issue and has received no customer complaints. The total population of the recall including Canada, Mexico and exports is 82,620. Transport Canada Recall # 2015322 Recall Date 2015/07/21 Notification Type Compliance Mfr System Electrical Manufacturer Recall Number 15568 Units Affected The number of vehicles or components affected by the recall. 7,922 Category Car Recall Details Certain vehicles equipped with power-operated sunroof system may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 118 - Power-Operated Window, Partition and Roof Panel Systems.

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.

2020 Cadillac CT6-V First Drive | A new kind of V

One of the weird tidbits of car news in the past year was the change in naming for the 2020 Cadillac CT6-V. When it was first revealed, it was called V-Sport, the term previously used for Cadillacs with more moderate performance upgrades than the full-blown V cars that possessed massive power outputs and serious track-going capabilities. But then, before the car in question went on sale, Cadillac changed the name to match the equally moderately sporty CT4-V and CT5-V that officially downgraded the V name. So what should we make of this CT6-V, then? Is it a hardcore performance machine like the old V cars? Or is it what we’re expecting of the new V cars: a lightly upgraded version of the base car that isnÂ’t particularly distinguished? As it turns out, the CT6-V sits between these two extremes to create a car thatÂ’s involving and exciting for the driver without compromising the CT6Â’s refinement and luxury. Mechanically, the CT6-V is ultimately closer to its full-bore V predecessors. The highlight is the “Blackwing” twin-turbocharged 4.2-liter V8 that makes 550 horsepower and 640 pound-feet of torque. Besides giving the engine prodigious output, Cadillac borrowed some pages from the AMG handbook: the turbocharger is nestled in between the cylinder heads, just like the current 4.0-liter AMG V8, and each engine is hand-built start to finish by one of six engine builders. The builderÂ’s name is even featured in the engine bay. TheyÂ’re special details that fit the idea of the old V cars, but the fact that a version of the same engine is in the Platinum CT6 does make its inclusion in the CT6-V seem less special, even if its output is notably less at 500 horsepower and 574 pound-feet of torque. Setting aside the details, the engine performs well in the real world. ItÂ’s astonishingly smooth, exactly what you want from a fast flagship. It also emits a unique exhaust note thatÂ’s both raspy and growly. You wonÂ’t mistake it for a pushrod powerplant. The power and torque provide a prominent push at all points in the rev band after a brief moment for the turbos to spool up. ItÂ’s just a shame there isnÂ’t much of a rev band, as the engine redlines at 6,000 rpm, which is easy to hit thanks to the engineÂ’s creamy character. ItÂ’s so low one wonders why Cadillac bothered developing a double-overhead-cam engine at all. The V8 is coupled to a 10-speed automatic transmission and all-wheel drive. The 10-speed is perfectly fine when cruising around town.