Leather Interior V8 Engine Chrome Wheels on 2040-cars

Auto blog

Hotter Cadillac CT5-V prototype spotted with a manual transmission

Fans of the old Cadillac CTS-V (and high-performance sedans in general) may have something to be excited about. A series of interior photos leaked Tuesday reveal that prototypes of the forthcoming higher-output variant of the CT5-V Sedan have been equipped with a manual gearbox. Exclusive: Photos show the wilder Cadillac CT5-V will have a manual transmissionhttps://t.co/Ta8hZ804eg — The Drive (@thedrive) March 10, 2020 Photos obtained by our friends at The Drive show a partially camouflaged CT5-V prototype with a full interior and what appears to be a manual gear selector. While the shifter and its boot are partially obscured by a plastic covering, it's obvious that the knob is not the same one paired with Cadillac's automatic gearboxes, such as the one featured in our expertly augmented photo above.  This is not the first time the potential for a stick-shift option in the new, higher-end "V" cars has been floated. Rumors suggesting that the as-yet-unnamed higher-output CT4-V and CT5-V models might be so-equipped (at least optionally) circulated late in 2019. This, in addition to significantly higher power outputs and revised suspensions will set them apart dramatically from the base CT4-V and CT5-V, which are intended to compete with the likes of the Audi "S" line of vehicles.  CT4-V spied View 40 Photos GM has been quite cagey when it comes to details about these new models. We know they'll follow in the footsteps of previous-generation "V" cars, which were aimed squarely at Europe's powerhouse sport sedans. The hotter CT5 variant is expected to employ the automaker's 6.2-liter supercharged V8, which made 640 horsepower in the now-dead CTS-V.  We reached out to Cadillac for comment and were told by a spokesperson, "The ultra-performance variants of our Cadillac CT5-V and CT4-Vs are still under development.  We will have more details to share in the next few weeks and the CT5-V and CT4-V ultra-performance versions will debut later this year. Until then, I can only confirm that these cars will build on V-SeriesÂ’ respected legacy." Hopefully, GM won't make us wait too much longer for official details of these new high-performance models, including what we should expect in terms of powertrain availability and launch timing. Stay tuned. Related Video:

Ward's reveals annual 10 Best Engines list for 2013

Ward's Auto has released its annual 10 Best Engines award winners. The 2013 list covers the full width and breadth of the internal combustion spectrum, from a spate of efficient four-cylinders to the most powerful production V8 on the planet. As always, the entries must be available in a production vehicle in the first quarter of 2013 with an MSRP of less than $55,000. The supercharged 3.0-liter V6 from the Audi S5 held on for the fourth consecutive year, and BMW earned two spots on the list with its turbo 2.0-liter four-cylinder and turbo 3.0-liter inline-six.
Ford pulled in two awards for its 2.0-liter EcoBoost four-cylinder and and the supercharged 5.8-liter V8 from the Shelby GT500. Honda matched BMW and Ford with two wins of its own. Wards awarded the 2.4-liter four-cylinder from the Honda Accord Sport as well as the 3.5-liter V6 from the Honda Accord. Chrysler, General Motors and Subaru each garnered a spot on the list as well for the 3.6-liter V6 in the Ram 1500, the turbo 2.0-liter four-cylinder in the Cadillac ATS and the 2.0-liter four-cylinder the Subaru BRZ, respectively. You can read the full press release below for more information.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.