Leather Factory Warranty Cruise Control Cd Player All Power Off Lease Only on 2040-cars

Auto blog

GM may have teased a whole group of electric vehicles

During GM's big CES press conference, the automaker highlighted a number of its upcoming electric car-related projects from delivery vans to the upcoming flagship Cadillac Celestiq. In the middle of it all, a collection of mystery cars sat in the background behind speakers. They were in the dark, lit only with their running lights, and while it's possible they're just generic filler cars or concepts, we think they could be future products. Our best shot of the cars together is shown above, and we can pretty easily identify three of the vehicles. In the center is obviously the GMC Hummer EV. On either side of it are Cadillacs. To the left seems to be the Lyriq crossover, and to the right is the Celestiq sedan. Two of these cars have production dates, and the third has been confirmed for eventual production, just without timing. This is why we think the rest of the cars are upcoming models. The next most easily identified car is on the near right behind the Cadillac Celestiq. It very clearly has a Chevy bowtie illuminated in the running lights. And looking closely, it appears to be a pickup truck. It's difficult to make out anything more than that. The nose does look a bit more rounded and swept back than the brick-like designs of the Silverado truck line. That also squares with what seemed to be the upcoming truck that appeared in the background of yet another GM presentation. GM previously said this electric Chevy truck will be a full-size model with up to 400 miles of range. That leaves us with three more mysterious models. Over to the left behind the Cadillac Lyriq are what appear to be a pair of crossovers. The one on the far left looks low, curvy, and possibly with a fastback roof. The one on the right is taller, boxier, and probably more of a full-size people hauler. It's hard to say much more beyond that. They could be new electric Buicks, which would fit in nicely with that brand's crossover portfolio, and would likely be highly successful in China, where Buicks, crossovers and electric cars are all rather hot commodities. As for the mystery car on the far right, it's quite a puzzle. We can at least rule out Buick and Cadillac, and GMC since it's definitely a car, and a rather small one compared with the other cars on display. That leaves Chevy, and possibly the autonomous division Cruise. We're leaning toward it being a Chevy, since the first Cruise vehicle is going to be a boxy pod of sorts.

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.