Fwd 4dr Luxury Collection Low Miles Suv Automatic Gasoline 3.0l Vvt Dohc V6 Sidi on 2040-cars

Auto blog

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: