2014 Cadillac Srx Luxury on 2040-cars

Auto blog

Cadillac confirms 420-hp twin-turbo V6 for 2014 CTS [w/videos]

The 2014 CTS will break cover next week at the New York Auto Show, but Cadillac has released a few details of what we can expect to find under the car's hood. As we saw in some spy shots back in January, the biggest news for the midsize Caddy will be a twin-turbocharged V6 producing a whopping 420 horsepower and 430 pound-feet of torque.
This LF3 engine will be paired to a new eight-speed automatic transmission, which will help balance performance and fuel economy. We still don't know how much the 2014 CTS has grown in terms of size and weight, but General Motors says that new sedan will return 17 miles per gallon in the city and 25 mpg highway with the new engine to go with a 0-60 mile per hour time of 4.6 seconds - that means the new CTS will have the fuel economy close to the current base model sedan and acceleration not too far from the current CTS-V. General Motors also confirmed that this twin-turbo V6 will be available in the 2014 XTS this fall.
The next-generation CTS will carry over the 3.6-liter V6 from the current car (likely as a base engine) and also add the 2.0-liter turbo four-cylinder from the ATS. Check out all the details on this new engine and watch a few videos (including GM's nifty tilt rig) by scrolling below.

Reservations for Cadillac CT4-V and CT5-V Blackwing models to open in February

Cadillac will unveil its high-performance CT4-V Blackwing and CT5-V Blackwing sedans on Feb. 1 and will accept reservations for the cars the same day. Only 250 examples of each car will be built for 2022, and immediately after the reveal, customers can secure one of these Caddies with a $1,000 deposit, which is refundable. Deliveries are set to begin in mid-summer. As a special enticement, those first 250 cars will get a numbered plaque on the steering wheel, which indicates the model, transmission, and build sequence. Note that the plaque comes only on cars equipped with the high-performance steering wheel, which based on the teaser image below appears to have carbon fiber accents. It's standard on the CT5-V Blackwing and included on mid-level and higher versions of the CT4-V Blackwing. We already know that the CT5-V Blackwing will be available with carbon fiber seatbacks. More exciting news is that Cadillac will buck the prevailing trend and offer a six-speed manual transmission as standard equipment in both cars. A 10-speed automatic also will be available. It's not yet known what engine will power the sedans, although it's not expected to be the eponymous 550-hp Blackwing V8 that had an abbreviated run in the just-discontinued CT6-V. Cadillac has also announced that Blackwing buyers can avail themselves of a 2-day high-performance driving school experience at Cadillac's V-Series Academy at the Spring Mountain Motor Resort in Pahrump, Nevada. They're on their own as far as getting there, however. The unveiling of the two new Blackwings on Feb. 1 will take place at the brand's main website as well as its Twitter page. Related Video:    

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.