2011 Cadillac Srx Luxury Pano Sunroof Nav Rear Cam 29k! Texas Direct Auto on 2040-cars

Auto blog

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.

Diesel engine will be a no-cost option on 2021 Cadillac Escalade

Pricing for the redesigned 2021 Cadillac Escalade was revealed yesterday, with the various trim levels ranging from $77,490 to $101,290 including $1,295 destination. And while we also learned that all-wheel drive will be a $3,000 option, what's surprising is that the optional 3.0-liter inline-six diesel engine will cost $0, this according to official pricing info released by Cadillac. The diesel is one of two engine choices for the new 2021 Escalade, the other being a 6.2-liter V8. The engine also is coming to the 2021 Chevrolet and GMC full-size SUVs, but it's not yet known what the upcharge will be there, if any. Already, the 3.0-liter I6 diesel is offered in the Chevy Silverado and GMC Sierra 1500 pickups, where it is currently a $2,500 option over the 6.2-liter V8. The Duramax inline-six turbodiesel is an aluminum-block design with dual overhead camshafts and a single, variable-geometry turbocharger. Cadillac quotes preliminary outputs of 277 horsepower and 460 lb-ft of torque. The 6.2-liter V8, meanwhile, musters 420 horses and the same torque output. The primary draw for the diesel is expected to be fuel economy. EPA estimates for the diesel engine in the Escalade (and in the GMC and Chevrolet full-size utes) have not yet been released. But in the pickup trucks, the engine returns 23 city/33 highway miles per gallon with rear-wheel drive and 23/29 mpg with four-wheel drive. The 2021 Cadillac Escalade had been scheduled to reach dealerships this summer, but it's not known whether that date might slip due to the current shutdown at GM's assembly plants. Related Video:

Cadillac's striking Escala concept is reportedly headed for production

Cadillac is reportedly planning a new flagship four-door, and it won't be based on its alphanumeric naming system a la the CT6. It'll be the Escala, the stunning concept fastback it revealed in 2016 in Pebble Beach. The news comes via Autoline, which cites AutoForecast Solutions. The Escala is said to be planned for production starting in December 2021 at GM's Detroit-Hamtramck plant, which currently builds the CT6, Buick LaCrosse and Chevrolet Volt and Impala. That suggests the Escala, which was branded as a four-door coupe, will likely keep that layout. It'll also be built on the CT6 platform. Cadillac has been talking about fitting a flagship sedan above the CT6 for years, and the Escala's design language has been influencing bits of other Cadillac models, from the refresh of the CT6 to the broad grille shape on the new XT4 crossover, which debuts at the New York Auto Show next week. The concept Escala featured a wide, muscular stance and a minimalist, white mid-century modern interior aesthetic, with tail lamps that evoke waterfowl in flight. Interestingly, it came equipped with a 4.2-liter twin-turbo V8 with cylinder deactivation, which Cadillac President Johan De Nysschen said at the time was "absolutely worthy of a car of this caliber." But with such a long horizon before production, there's obviously lots of time to develop a more pragmatic production model and cue ravenous speculation. Or, for that matter, to decide to rename it something like the CT8. Related Video: Featured Gallery Cadillac Escala Concept View 33 Photos Image Credit: Jeff Jablansky Design/Style Cadillac Coupe Concept Cars Luxury Sedan cadillac ct6 cadillac xt4 cadillac escala