2011 Cadillac Srx; Extra Clean; L@@k! on 2040-cars

Auto blog

Next Cadillac Escalade interior will have Mercedes-like screens

Not too long ago, we thought we got a glimpse at the next-generation Cadillac Escalade's interior. But as we have learned from the spy photographer who took it, those are actually for a different full-size GM SUV, probably the GMC Yukon. How can we know this? Well, that same photographer caught this SUV, and it has a fancier interior and a key Cadillac interior piece that proves this is actually the Cadillac interior. The big difference with this interior is the instrument cluster and infotainment system. The previous SUV we saw had a pretty conventional interior with plenty of buttons, a screen at the top of the center stack, and an instrument cluster under a plastic hood. On this presumed Cadillac SUV, it has one large monolith containing screens for instruments and infotainment. It's very much like what you'll find in Mercedes-Benz models. Unlike in Mercedes cars, this bank of screens appears to have some curve to it, orienting everything toward the driver. Besides the fancy screens that point to Cadillac, the shifter also clinches this as the Cadillac interior. It's the same monostable lever found in the latest Cadillacs such as the XT6 and CT5. Much of the rest of the interior has been pretty well covered. But we can tell that Cadillac is using some nice wood trim that appears to stretch across the dashboard. The dash itself also looks as though it will be rather low and minimalist. Like past Escalades, this will probably share most of its mechanicals with the Tahoe/Suburban, meaning it too will be making the long overdue switch to independent rear suspension. It will also likely continue to offer the 6.2-liter V8 and 10-speed automatic transmission as the only powertrain choice. We should see the new SUVs in the next couple of years.

Next Cadillac Escalade's interior spied for the first time

Update: Now that new spy photos of another large GM SUV have surfaced, we believe these shots show us a GMC Yukon interior, not a Cadillac Escalade. You can see the new spy shots here that depict a much more upscale vehicle interior compared to the fuzzy center stack shown in the shots of the Yukon. The new Cadillac Escalade has a lot of work to do in order to properly compete with Lincoln's wonderfully luxurious Navigator. These interior spy photos are our first look at what Cadillac is working with on the inside of its new luxury truck. We won't make final judgements, as this vehicle is still a prototype and subject to change. However, a few key bits are noticeable from the fuzzy photos. As expected, Cadillac's CUE infotainment and center stack is nowhere to be seen. Replacing it is a new interior design language, with a tablet-like screen that seems to rise out of the sloped stack on top. Below the screen is a strip of stitched leather and a couple prominently placed air vents. To the left of this area is what appears to be a push-button gear shifting system, replacing the column-mounted shifter currently in use. Below all that on a lower level of the center stack are all the climate controls, along with what look like physical buttons for what could be audio-related controls. Does it look as luxurious as the Lincoln? Not with all the coverings and shrouding it doesn't, which means we'll have to wait until we get the full picture. One thing that's clear is that the interior design is definitely going to be wildly different than the current Escalade. That center stack flows downward as one sloping piece into the high and bulky center console area. This design looks like it brings the center console further downward, and also uses a multi-tiered look. It's tough to read what's on the screen, but the software looks like the same stuff we got a preview of on the new Cadillac CT5 and CT4 sedans. As for the exterior shots, there's almost nothing that we haven't already gotten a taste of in previous spy photos. The independent rear suspension is a go, as are what appear to be massive headlight and LED DRL fixtures. If you look through the wrapping, you can make out how far up and down the lighting fixtures stretch ... or perhaps they're separate units altogether. It's tough to tell at this point.

Cadillac confirms Blackwings will get manual transmissions and 3D-printed parts

Cadillac's upcoming 2022 CT4-V and CT5-V Blackwing will be the first GM production cars to utilize 3D-printed technology. In fact, the technology will be featured front and center on one of the cars' most hotly anticipated features — in a decorative medallion atop the shift knob of the manual transmission. Cadillac says that "additive manufacturing" (named as such because 3D printing accumulates tiny deposits of material to create the object) made the manual transmissions possible by reducing costs and waste. Aside from the medallion, the cars will employ two 3D-printed two HVAC ducts and an electrical harness bracket. "[The manual transmission is] something we know V-Series buyers want and itÂ’s something we knew we had to have, so we used innovative processes to make it happen,” said Cadillac performance variant manager Mirza Grebovic. Speaking of which, Cadillac commissioned a Harris Poll survey about manual transmissions and received some interesting results. For example, 66 percent of American adults surveyed know how to drive manual, and 55 percent said they've owned a standard shift car. Of those who don't, roughly 40 percent are either somewhat or very interested in learning. Interest is highest among two key demographics, 64 percent of those earning $75,000 or more in annual household income, and 62 percent of those ages 18-34. The findings seem to contradict what many automakers have said about lack of interest in manuals, with some declaring a sub-1 percent take rate when manuals are offered. Perhaps with a performance-oriented car such as the V-series, buyer preferences change. The mix of old school gearboxes and new school manufacturing techniques will result in what looks like a very potent car on paper. The CT5-V Blackwing is rumored to be powered by an updated 6.2-litter V8, while the CTS-4 Blackwing is said to be motivated by a turbo six. Neither will use the twin-turbo 4.2-liter V8 of their namesake, but they should prove to be worthy successors to the CTS-V and ATS-V. Related Video: