2011 Cadillac Srx-4 Awd 21k Camera 6cd Panorama Power Lift Gate on 2040-cars

Auto blog

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

Cadillac won't replace XTS after 2019

Cadillac wouldn't be Cadillac without a large sedan, but the definition of just which model fits that bill changed last week. Before the New York Auto Show, that role fell to the XTS. After the New York Auto Show, though, the focus shifted to the CT6. So what's to become of the XTS now that the CT6 has emerged? According to the latest intel, it'll live out the rest of its lifecycle until around 2019, but then drive off to its own funeral like so many limousines and hearses that were built off its platform. This was learned based on comments made by Cadillac chief Johan de Nysschen at the closed-door unveiling of the CT6 in Manhattan: "Ultimately, a car like XTS when it reaches the end of its lifecycle, will not be replaced." That'll be bad news for the livery business that – in the post-Town Car era – has come to rely on the XTS as the basis for its stretch jobs. "We will not have a car that will lend itself to these kind of modifications and we will probably withdraw from those markets," de Nysschen told GM Inside News. That's not all the new Cadillac boss had to say, though: he also indicated that the replacements for the ATS and CTS will be positioned differently from the current models: "As we move into the future refining our sedan portfolio, there will be no direct successor to the CTS. There will be no direct successor to the ATS. There is no point to renaming those cars because in the future those cars will disappear." Based on Johan's comments and those we've heard until now, we'd expect the replacement for the ATS to move down a size to take on the likes of the Audi A3 and Mercedes CLA, and the CTS' successor to move down half a size class as well to give the new CT6 a bit more breathing room, and possibly an even larger flagship sedan to be positioned above them all. Related Video:

GM's redesigned full-size 2021 SUVs face delay over coronavirus

As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.