1953 Cadillac Other on 2040-cars

Auto blog

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

2020 Cadillac CT5 revealed, will replace the CTS

Between the end of most of Cadillac's sedan offerings and the launch of the underwhelming XT6 crossover, things were looking dreary at the American luxury brand. But now we get an exciting surprise in the reveal of the 2020 Cadillac CT5 sedan. It's a clean, and arguably conservative-looking sedan, but there are a number of things that have us intrigued. The sedan is clearly the CTS replacement, since the name falls just below the flagship CT6 sedan. Under the hood are two familiar Cadillac engines, a 2.0-liter turbocharged inline-4 and a twin-turbo 3.0-liter V6. Power numbers haven't been announced, but expect each to make similar power to the current CTS: 268 horsepower and 295 pound-feet of torque for the four-cylinder and 420 horsepower and 430 pound-feet of torque for the V6. Rear drive and all-wheel drive are available, and both engines get a 10-speed automatic transmission. The car also adopts the trim level scheme introduced by the XT4 and XT6 crossovers, which means there are just two choices, Sport and Luxury. The Sport model, pictured in gray, has a more aggressive front fascia and dark taillights, while the Luxury model, shown in burgundy, has a more demure appearance and classic red taillights. We only get a glimpse of the interior, and it shows the latest electronic gear shifter shared with Cadillac's recent crossovers, along with a physical knob for interacting with the infotainment system. Cadillac announced that the car will make its public debut at the New York Auto Show, and it will be built at the Grand River factory in Lansing, Mich. We expect to get more details and images of the car when it's revealed at the show.