1948 Cadillac Other on 2040-cars

Auto blog

Will attaching the electrodes re-animate Cadillac?

This announcement last week from General Motors —"Cadillac will be GM's lead electric vehicle brand"— followed quickly by the surprise reveal Sunday night of a Cadillac EV crossover, leads one to wonder whether this is a case of GM pulling out the defibrillator and hoping a full-on jolt of electricity will revive Cadillac from its ongoing diminution in the market. In 2018, Cadillac U.S. sales were 154,702 vehicles, which was down from the 156,440 it had sold in 2017. And the 2017 sales were down significantly from the 170,006 vehicles delivered by Cadillac in 2016. And that is down from the 175,267 sales of 2015. Sure, part of Cadillac's problem — one shared by some other OEMs — is that its sedans aren't selling. But if we put those to the side, realize that in 2018 sales of the venerable Escalade were down by 2.2 percent. Admittedly, that rig is a little old in the grille, and it's suddenly gotten strong competition from the Lincoln Navigator, so a sales decline isn't too surprising. But the XT5, the compact lux vehicle that was launched in 2016 as a model-year 2017 product, had an 11.3 percent decline in a segment that is doing nothing but growing. This is not promising. Although the argument at GM HQ might be that Cadillac can reinvent itself as a Tesla fighter, one of the things that isn't often noted about Tesla vis-a-vis other OEMs is that while sedan sales are generally down, Tesla, which had an estimated 2018 sales volume of 197,680 (according to Cleantechnica.com), made its numbers primarily with the Model 3 and Model S, both sedans, as it has just the Model X crossover. So it isn't just about vehicle architecture. It is going to take more than an electric SUV to change Cadillac's performance. But here's where circumstances can fall in Cadillac's favor. Scale can be highly beneficial to Cadillac versus Tesla. The Chinese market, even though it is weakening of late, will be largely predicated on "New Energy Vehicles," which means electrified and fully electric. And while Tesla only just now broke ground on a factory in China, LMC Automotive reports that as of December 2018, SAIC GM is already well-established there and is the third-largest vehicle manufacturer in China (behind SAIC Volkswagen and FAW Volkswagen). Cadillac is going to be able to take advantage of GM's global efforts in developing EVs, so soon the Cadillac showroom could be filled with an array of luxury EVs that may make even Tesla loyalists take another look.

Meet the mother-daughter team that's worked on almost every Chevy Volt

It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.