Cadillac Fleetwood 1960 Style 60 - 6029 (60 Special), Paint 10-10c Color Black on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.

Cadillac is doing a 'second installment' of the CT6-V for $92,790

After being all but certain the Cadillac CT6 would begin pushing American daisies June 1, the brand said "the CT6 was never meant to be fully on the chopping block." The same day we got that news, Cadillac began taking pre-orders for the CT6-V. Limited to 275 units and costing $88,790 after destination, orders came in so quickly that order books closed only hours later. Turns out the phrase "275 pre-order slots" was another slight miscommunication. Cadillac has announced continued production of the CT6-V, this time costing $92,790. In February, Cadillac Society confirmed with the automaker that the 275 figure only applied to pre-orders. It isn't clear how many CT6-Vs will be built in what the brand calls the "second installment," but it is clear that buyers who didn't get in early will pay more. Cars Direct was privy to a letter sent to dealers that said pre-order buyers "were rewarded with a special introductory offer by quickly raising their hand." Those slow on the draw have hopefully used the extra time to fish another $4,000 from their pockets. The elevated price buys the same car that was $88,790 two months ago - nothing has changed but the bottom line. The new MSRP puts more distance between the hot CT6-V and the $89,290 CTS-V. Conversely, the CT6-V with a Blackwing V8 beating 550 horsepower and 627 pound-feet of torque is now just $4,000 less than the coming Platinum V8 trim, which costs $96,790. That Platinum version gets a detuned Blacking putting out 500 hp and 553 lb-ft. The vague phrase "second installment" phrase makes us think Cadillac's not committing to a number so it can cap production at will depending on how this more expensive go-round fares. Still, it's good news for anyone who wanted the sedan new and didn't hit the buzzer quickly enough in January. As if all that weren't surprising enough, GM Authority reported that there's a second-gen CT6 in development. The outlet's sources say the new sedan will move to GM's VSS-R platform, the modular architecture that will replace both the Alpha and Omega platforms. The platform initialism stands for Vehicle Set Strategy - Rear-wheel drive. The car even has a codename: 7ESL, where 7 represents the architecture, E the segment, S the sedan body style, and L the Cadillac brand. Looks like the CT6 will be nothing but surprises this year.