1996 Cadillac Fleetwood Brougham Sedan 4-door 5.7l on 2040-cars

Auto blog

GM recalling 54k Cadillac SRX, HD pickup models

There are more recalls to report General Motors, but these latest actions pertain to newer examples of the Cadillac SRX, Chevrolet Silverado HD and GMC Sierra HD. With so much scrutiny on the company's recall strategy, GM is under increasing pressure to call in defective models more quickly, and it appears to be doing so here.
Here in the US, the automaker is recalling 50,571 Cadillac SRX crossovers from the 2013 model year fitted with the 3.6-liter V6 because the transmission control module programming can cause a three- or four-second lag in acceleration at low speeds. The explanation filed with the National Highway Traffic Safety Administration states, "if the following sequence occurs within two seconds: during an upshift from first to second gear (8-10 mph), the driver then brakes the vehicle to less than 5 mph, and then accelerates again," the delay can occur. According to Automotive News, the recall effects 56,400 vehicles worldwide, and the company is not aware of any crashes caused by the problem. The fix consists of a transmission control module (TCM) reflash.
In a separate recall, GM is repairing 51 Chevrolet Silverado HD and GMC Sierra HD pickups from the 2015 model year in the US. In vehicles with diesel engines and dual fuel tanks, the nuts that connect the fuel pipe to each side of the transfer pump between the tanks may be improperly torqued, which could cause a fuel leak. Obviously, this could be a fire hazard. The remedy is simply tightening the hardware. According to GM spokesperson Alan Adler, there have been no fires actually caused by the potential leak. "Only 21 of the trucks are in customer possession and they can be fixed anytime because there are no parts involved. The others are being fixed at dealerships," Adler said in an email to Autoblog.

Cadillac CT6 hybrid likely to appear in Shanghai

Cadillac is poised to reveal a hybrid version of the CT6 sedan later this month at the Shanghai Motor Show. Rumors have swirled of the sedan's pending reveal, and General Motors product chief Mark Reuss reportedly confirmed its existence last fall during an investor conference. On Wednesday, Reuss again said that GM is working on the hybrid CT6, and when asked by Autoblog, he hinted at the pending debut. "We've really got to wait until we finish rounding out the portfolio," he said. "The Shanghai show is where you should look for all of it. So stay tuned." A Cadillac spokesman declined to comment, but confirmed "we will add variants." The brand has already announced two V6 engines and is looking to expand the line. Reuss also said GM has considered a V-Series model for the CT6, but it's focusing on launching the four-cylinder and V6-powered sedans first and promoting V-Series versions of the CTS and ATS that arrive this year. "The [CT6] architecture is certainly capable of doing it," he said. "The question is who's going to buy the CT6? What kind of person? And do we need a V-Series off of that is the question we haven't answered yet. It's certainly capable of doing it ... we've certainly thought about it." Details of the hybrid powertrain aren't known, but it could use plug-in technology. Chevrolet announced the 2016 Malibu will get a hybrid model that employs electric powertrain features from the new generation of the Volt. For the CT6, electric-vehicle technologies would likely be used to extend range and aid the performance of the conventional engine. Related Video:

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).