1960 Cadillac Fleetwood 60 Special Still On Air Suspension on 2040-cars

Auto blog

2020 Cadillac CT5 revealed, will replace the CTS

Between the end of most of Cadillac's sedan offerings and the launch of the underwhelming XT6 crossover, things were looking dreary at the American luxury brand. But now we get an exciting surprise in the reveal of the 2020 Cadillac CT5 sedan. It's a clean, and arguably conservative-looking sedan, but there are a number of things that have us intrigued. The sedan is clearly the CTS replacement, since the name falls just below the flagship CT6 sedan. Under the hood are two familiar Cadillac engines, a 2.0-liter turbocharged inline-4 and a twin-turbo 3.0-liter V6. Power numbers haven't been announced, but expect each to make similar power to the current CTS: 268 horsepower and 295 pound-feet of torque for the four-cylinder and 420 horsepower and 430 pound-feet of torque for the V6. Rear drive and all-wheel drive are available, and both engines get a 10-speed automatic transmission. The car also adopts the trim level scheme introduced by the XT4 and XT6 crossovers, which means there are just two choices, Sport and Luxury. The Sport model, pictured in gray, has a more aggressive front fascia and dark taillights, while the Luxury model, shown in burgundy, has a more demure appearance and classic red taillights. We only get a glimpse of the interior, and it shows the latest electronic gear shifter shared with Cadillac's recent crossovers, along with a physical knob for interacting with the infotainment system. Cadillac announced that the car will make its public debut at the New York Auto Show, and it will be built at the Grand River factory in Lansing, Mich. We expect to get more details and images of the car when it's revealed at the show.

GM executive chief EV engineer says reducing cost of plug-in vehicles is 'huge priority'

As we know, another major automaker investing heavily in electrified vehicles is General Motors, and it's doing things much differently than rivals BMW, Ford or Nissan. The Chevrolet Volt extended-range EV is a modest seller at its $35,000 sticker price but a huge hit with owners. The Chevy Spark BEV, still in limited availability, puts smiley faces on its owners and drivers. The just-introduced Cadillac ELR, a sharp-looking, fun-driving $76,000 luxocoupe take on the Volt's EREV mechanicals, has admittedly low sales expectations. With this interesting trio in showrooms and much more in the works, the third vehicle electrification leader I collared for an interview at Detroit's North American International Auto Show (see #1 and #2) was Pam Fletcher, GM's executive chief engineer, Electrified Vehicles. ABG: Why do your EREVs need four-cylinder power to extend their range when BMW's i3 makes do with an optional 650 cc two-banger? "We designed [the Volt and the ELR] to go anywhere, any time" - Pam Fletcher PF: I get that question all the time: why not something smaller? You don't really need that much. You use the electric to its ability, then you just need to limp. But we designed those cars to go anywhere, any time, and we don't want their performance to be compromised. If you're driving through the mountains, we don't want you to be crawling up grades, or to be limited on any terrain. So it's optimized to be able to travel literally the biggest grades and mountain roads around the globe at posted speeds. Because what if you can't? Another good reason: when the engine is on, you have to run it wide open throttle, max speed, most of the time. And while we can do a lot with acoustics, and the ELR has active noise cancelation, a small-displacement, low cylinder-count engine at high speed, high load all the time isn't something you want to live with. That's how we came up with the balance we did among the key factors of performance, NVH [noise, vibration and harshness] and range. ABG: Where you go from here? Is the range-extender engine due for an update? PF: We know and love the current Volt, and there is still a lot of acclaim about it, so we think it's a good recipe. But we are heavily in the midst of engineering the next-generation car, which I think everyone will love and be excited about.

Cadillac XT4 crossover to be built in Kansas City

Cadillac's upcoming XT4, a crossover we've previously known as the XT3 in a long series of spy shots of heavily camouflaged mules, will be built at General Motors' assembly plant in Kansas City on the same platform as the Chevrolet Malibu, Bloomberg reports, citing people familiar with the plan. That will give Cadillac another entry in the red-hot luxury crossover segment and, GM hopes, help to reverse a sales slump in the U.S. It'll also breath life into the Kansas City plant that makes the slow-selling Malibu, where GM cut a third shift last year, by sharing the assembly line between the crossover and sedan and defraying costs for each vehicle. The XT4 was known most recently as the XT3, with styling cues based on the Escala concept sedan from 2016. It's slightly smaller than the XT5, Cadillac's top-selling vehicle, and will also augment the full-size Escalade in Cadillac's stable of SUVs when it makes its expected debut later this year. Cadillac last week reported its second-highest-ever sales mark with 356,467 vehicles, an increase of 15.5 percent over 2016. But that mark papers over an 8 percent sales decline in the U.S. to 156,440 vehicles. The luxury brand is on a hot streak in China, where sales jumped 50.8 percent last year to 175,489 units.Related Video: Image Credit: Brian Williams Plants/Manufacturing Cadillac Chevrolet GM Crossover sales cadillac xt5 cadillac xt4 cadillac xt3