1947 Cadillac Fleetwood on 2040-cars

Auto blog

How Cadillac improved power output in 2016 ELR by 25 percent

Earlier this year, Cadillac announced that the 2016 ELR would come with a big price drop and a powertrain that packs 25 percent more power output. That's a lot more oomph, but it didn't sound like the Caddy engineers made any major changes to the engine or motors. So, what happened? Let's refresh our memories with the numeric details. The 2016 car is 1.5 seconds quicker to 60 miles per hour than the 2014 model (there was no 2015), down to 6.4 seconds. The 2014 put out 295 pound-feet of torque. For 2016, it will be 373 lb-ft. The specific breakdown of the various components in the powertrain has not been disclosed, but from what we can tell, the two electric motors and the 1.4-liter inline-four engine in the new ELR are not that much different than those in the old one. Sam Abuelsamid, senior research analyst at Navigant Research (and former writer here at Autoblog) said that any of the unspecified upgrades would be difficult to tell on a part-by-part basis, but the overall effect will be noticeable. "The changes to the ELR as I understand them are analogous to getting more performance out of a 1965 Mustang with the entry version of the 289 cubic-inch V8. You can replace the carburetor with a larger version that enables more air and fuel to flow into the engine, thus producing more power. The basic engine hasn't changed, but power capability is being unleashed by feeding it more." "Cadillac has changed components in the power electronics to enable more current flow into the motor and thus produce more torque. When you do this in the Mustang, you probably need to replace the rear axle gears and use a beefier clutch to transmit the power to the wheels. Similarly, the ELR probably has some upgraded clutches, bearings, and gears to withstand the increased total output." Cadillac spokesperson David Caldwell told AutoblogGreen in an email that the new ELR does indeed have more than just new lines of code. "One could not 'reflash' a previous ELR to get the performance of a 2016," Caldwell said. "If one only changed software you would not get the performance upgrade fully, as the 2016 creates higher current, more power. So these have been upgraded physically – hardware.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Al Capone’s bulletproof 1928 Cadillac Town Sedan is back on the market

It turns out that infamous mob boss Al Capone played an early role in the development of the modern armored executive car, and now there’s another chance to own his bulletproof 1928 Cadillac Town Sedan, which is being offered by Celebrity Cars of Las Vegas for a cool $1 million. It was last seen netting $341,000 at auction by RM SothebyÂ’s in 2012 and does not appear to have undergone significant restoration since then, raising the question of why its value has jumped nearly threefold. Painted green with a black roof, fenders and bumpers, the car is said to be the earliest surviving bulletproof vehicle, with nearly inch-thick glass and once lined (but no longer; read on) with nearly 3,000 pounds of asbestos-wrapped steel armor plating. It features a rear window rigged to drop quickly, so the tough guys in the rear seats could fire on any pursuers. Heavy spring lifts operated the side windows, which were also rigged to raise higher than usual to reveal a circular cutout big enough for the muzzle of a machine gun. In this case, the factory specs may be the least interesting part of the car, though it is undeniably a looker. It features a Series 341-A, 90-bhp, 341 cubic-inch L-head V8 engine mated to a three-speed manual, with a beam front axle and full-floating rear axle with semi-elliptical leaf springs and four-wheel mechanical drum brakes. It has only 1,111 miles on the odometer, having spent much of its history in museums or on display at carnivals and amusement parks. ItÂ’s believed to have flown under the fedsÂ’ radar in a Chicago garage owned by Emil Denemark, a known mafia associate and South Side Cadillac dealer who was related to Capone by marriage, when the mob boss began his slide into legal troubles leading up to his eventual felony conviction and jail time. In 2008, an elderly man named Richard “Cappy” Capstran told a friend that he had once helped his father install armor plating on a Cadillac owned by Al Capone. His father, Ernest Capstran, had repaired another of CaponeÂ’s vehicles and earned the mobsterÂ’s business fortifying the brand-new Cadillac. “My dad said, ‘We donÂ’t do that kind of work here.Â’ And they (CaponeÂ’s men) said, ‘You do now,’” Richard Capstran recalled in a recorded interview, per SothebyÂ’s. CaponeÂ’s associates reportedly also backed the car into the shop so no one could see what kind of work was being done to it.