2015 Cadillac Escalade on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

2019 Cadillac XT4 interior has actual buttons, no more touch-sensitive panel

Cadillac makes some highly stylish cars that are excellent to drive. In the realm of infotainment, there was room for improvement. The CUE infotainment system is infamous for being complex and annoying. One particular sore point was the touch-sensitive panels used for basic functions and their unrefined, "haptic feedback" clunk. Thankfully, spy photos show that Cadillac is changing tack both with buttons and infotainment controls in general. As seen above, there don't appear to be any capacitive buttons in sight. Instead, the XT4 has the "piano-key" buttons that are in vogue now. The most prominent are metal-finish buttons that control climate settings indicated by corresponding symbols above the buttons. Below that are additional buttons for seat controls and at least one safety feature, the parking warning. These should be vastly easier to manipulate than tapping and hoping you've engaged the correct function. This doesn't mean there won't be any touch-sensitive controls available, but they've at least been minimized. Other physical controls we spotted are down on the center console near the shifter. It looks as though the CT6's odd touchpad won't be making an appearance in the XT4 as there seems to be a more conventional knob instead. If it's indeed for the infotainment system, it would be a redundant controller as the upper screen's home button and fingerprints would indicate it's very much touch-operated. Like other Cadillacs and GM products in general, it's safe to say that Apple CarPlay and Android Auto will be available and possibly standard. There are a couple other interesting additions besides the physical controls. There's a Near Field Communications (NFC) logo embossed in the dashboard, indicating the car will support NFC pairing of phones. The XT4 also dispatches the more traditional mechanical shifter for a more modern monostable joystick like the found in some Buicks, but with a different shape. We're currently expecting the XT4 to be revealed late in 2018. It will be based on the Chevy Malibu platform, it'll probably stick with turbocharged four-cylinder power, and offer front- and all-wheel drive. Related Video: Featured Gallery 2019 Cadillac XT4 spy shots View 19 Photos Image Credit: Brian Williams Spy Photos Cadillac Technology Infotainment Crossover SUV Luxury cue cadillac xt4 cadillac cue