2014 Cadillac Escalade Esv Platinum Edition on 2040-cars

Auto blog

Cadillac CT6 gets a plug in Shanghai, will come to US

Don't call it the third coming of the Chevy Volt. The unsurprising debut of the Cadillac CT6 PHEV in Shanghai today has a powertrain that sounds an awful lot like the one that can be found in the Volt and the Cadillac ELR. The plug-in CT6 – identical to the CT6 that debuted in New York earlier this month – has an 18.4-kWh lithium-ion battery (just like the 2016 Volt) and offers an all-electric range of around 37 miles. It also copies the "Regen on Demand" feature from the new Volt and the battery cells "use the latest generation cell chemistry found in other GM plug-in vehicles." But Cadillac President Johan de Nysschen doesn't see the two powertrains as similar in at least one important way. General Motors calls the Volt and the ELR "extended range electric vehicles" (EREV) but in a statement, de Nysschen says that the plug-in hybrid CT6 is, "an ideal platform for Cadillac to offer its first plug-in hybrid." That GM is using the PHEV terminology rather than EREV is going to be important to some, even if the practical difference is only semantic. And yes, we all understand the irony of de Nysschen – the same guy who has a history of speaking ill of plug-in cars – hyping them now. Back when he worked for Audi, he said the original Volt was too expensive for what it offered and was thus, a car for "idiots." Speaking in Shanghai today, de Nysschen said the new CT6 PHEV was, "an EV without any of the disadvantages or range constraints," according to Automotive News. If the batteries are similar to GM's other EREV/PHEV cars, the CT6 powertrain is at least different. The ELR uses a 1.4-liter engine, while the new Volt has a 1.5-liter four-cylinder mill. The CT6, on the other hand, has a 2.0-liter turbo four-cylinder engine with direct injection. There is also an "all-new rear wheel electric variable transmission (EVT) with exclusively designed motors," that will give the CT6 PHEV, "smooth, spirited acceleration." The EVT is a two-motor-unit that uses three planetary gears. Maximum overall system output is 335 horsepower and 432 pound-feet of torque. Perhaps most interesting for American audiences is the fact that GM's press release, available below, makes multiple references to US-market sales of the PHEV. Official details on the EV range and fuel economy will be made available closer to the car's US launch.

Junkyard Gem: 1993 Cadillac Allante

The General's Cadillac Division had lost much of its status as a world-class styling and engineering innovator by the 1980s, while younger rich Americans signed on the line which is dotted for European luxury machines packed full of futuristic technology. Something needed to be done to win back the hearts of those buyers, and that something was the Cadillac Allante two-seater. Here's a final-model-year Allante, complete with one of the very first Northstar V8 engines, found in a Denver yard. The overhead-valve Cadillac V8 engine of 1949 shook up the automotive world, and the double-overhead-cam Northstar V8 of 44 years later had a similar effect. Finally, a high-revving, smooth-running modern V8 to compete with those pesky European and Japanese carmakers! Only the Allante got the Northstar at first, with other Cadillac models following soon after. After the underwhelming power output of the pushrod HT4100 V8s used in the 1987-1992 Allantes, the upgrade from 200 horses to 290 helped boost sales of the '93 to the highest annual figure ever achieved by the model: 4,670 cars. Unfortunately for GM, production costs of the Allante proved to be murderous in the long run. Shortened Eldorado frames were loaded onto specially-fitted 747s in Detroit and flown to Pininfarina's new Allante factory in Italy. After Pininfarina built the bodies, they got loaded onto the 747s, flown back to Detroit, trucked to the Hamtramck assembly plant, and given running gear there. GM called this system the "Allante Air Bridge" and it cost plenty. The cars looked both futuristic and Italian, which they were, but the Allante's price tag stood at heights far above those of the rest of the Cadillac line: $59,975 in 1993, or about $108,500 in 2020 dollars. You could buy a rear-wheel-drive BMW 850Ci with a 282-horse V8 and manual transmission for a mere 10 grand over the Allante's cost that year, or a Jaguar XJS convertible for just $56,750. The Allante had front-wheel-drive and a not-so-modern four-speed automatic transmission, which hurt sales among the enthusiast types who flocked to Cadillac showrooms for the CTS-V a decade or so later. No European machine of 1993 could top the Mars Base appearance of these vertically-arranged, all-pushbutton HVAC/audio controls, though.

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.