2011 6.0l Black Hybrid on 2040-cars

Auto blog

Next Cadillac Escalade interior will have Mercedes-like screens

Not too long ago, we thought we got a glimpse at the next-generation Cadillac Escalade's interior. But as we have learned from the spy photographer who took it, those are actually for a different full-size GM SUV, probably the GMC Yukon. How can we know this? Well, that same photographer caught this SUV, and it has a fancier interior and a key Cadillac interior piece that proves this is actually the Cadillac interior. The big difference with this interior is the instrument cluster and infotainment system. The previous SUV we saw had a pretty conventional interior with plenty of buttons, a screen at the top of the center stack, and an instrument cluster under a plastic hood. On this presumed Cadillac SUV, it has one large monolith containing screens for instruments and infotainment. It's very much like what you'll find in Mercedes-Benz models. Unlike in Mercedes cars, this bank of screens appears to have some curve to it, orienting everything toward the driver. Besides the fancy screens that point to Cadillac, the shifter also clinches this as the Cadillac interior. It's the same monostable lever found in the latest Cadillacs such as the XT6 and CT5. Much of the rest of the interior has been pretty well covered. But we can tell that Cadillac is using some nice wood trim that appears to stretch across the dashboard. The dash itself also looks as though it will be rather low and minimalist. Like past Escalades, this will probably share most of its mechanicals with the Tahoe/Suburban, meaning it too will be making the long overdue switch to independent rear suspension. It will also likely continue to offer the 6.2-liter V8 and 10-speed automatic transmission as the only powertrain choice. We should see the new SUVs in the next couple of years.

Why Cadillac thinks it needs to succeed in Europe to sell cars elsewhere

Ward's Auto has taken an interesting look at the renewed focus General Motors is showing towards Cadillac in Europe. Susan Docherty, president and managing director of Chevrolet and Cadillac in Europe (pictured), says in order for the luxury brand to thrive in China, it first needs to succeed in the old country. The reason? Chinese buyers look to Europe for cues as to what's deemed worthy of the term "luxury." There are hurdles to the plan, however. In addition to the fact that the EU is flooded with high-end nameplates, GM doesn't necessarily have the distribution network in place to put buyers behind the wheel.
Combine that with persistent economic woes and Cadillac's checkered past marred by a lack of diesel engine options and a bankrupt distributor, and the road ahead for the brand looks like less of an uphill climb and more like a straight-up cliff face. But Docherty is optimistic and says she has a plan for the brand. We recommend heading over to Ward's for a closer look at the full read.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.