2010 - Cadillac Escalade on 2040-cars

Auto blog

2014 Cadillac CTS images leak from somewhere

The redesigned 2014 Cadillac CTS will be unveiled this Tuesday on the eve of the New York Auto Show, but as often happens, some images of the car have leaked onto the web a few days early. Previously, the only information we had on the 2014 CTS concerned the all-new twin-turbo V6 engine that will be found underhood, rated at 420 horsepower and 430 pound-feet of torque.
While none show the new car in its entirety, the images do show much of the front end, particularly the headlights that feature vertical bars of LEDs that start down low as foglights and continue up to the top of the front fenders. They're similar to the lighting design first shown on the XTS and ATS, except the lower portions are much taller.
There are also views of the rear end and one of the taillights, as well as an interior shot of the front passenger door. The latter image has us most intrigued, as it shows some very high end materials being used in the new CTS interior. The low-gloss wood trim, in particular, looks very premium.

2016 Cadillac ELR gets more power, $9,000 price drop

Cadillac has announced a series of updates to the ELR for 2016 that promises to make the plug-in hybrid luxury coupe a more desirable proposition. Perhaps chief among them is a price drop of $9,005 compared to the slow-selling 2014 model. The news follows an announcement yesterday that the Chevy Spark would get a $1,500 price drop. Cadillac is quoting a net price for the updated ELR at $58,495, which is obviously substantially less than the $75k it was asking for the previous version. But it's important to note that the new price is listed after US federal tax credits. The 2014 model came in at $67,500 after the full $7,500 tax credit, so math tells us that Cadillac has slashed the price on the 2016 ELR rather dramatically by about nine grand with a new MSRP of $65,995. One big upgrade on the performance front is a 25-percent boost in output from the hybrid powertrain that marries a pair of electric motors to a 1.4-liter inline-four gasoline-burning generator. The increase is said to be enough to drop 1.5 seconds off the 0-60 time, now quoted at 6.4 seconds. It'll travel for up to 39 miles on electric mode alone, but with the generator spooled up will go up to 330 miles before needing to stop. The engine management software has also been updated and the regenerative braking system reconfigured as well, but GM's luxury division didn't stop at the powertrain, fitting the 2016 ELR with a raft of other enhancements. Visually there's a new grille with the marque's latest emblem embedded. The suspension has been stiffened, the steering recalibrated and the brakes optimized for better feel. Cadillac is also throwing in the previously optional Driver Assistance package of active safety systems as standard, with adaptive cruise control available as an option. And the infotainment system comes with OnStar, 4G LTE connectivity and on-board Wi-Fi. There's even a Performance Package available with 20-inch performance tires offering 10-percent better lateral grip, four-piston Brembo brake calipers up front to help reducing stopping distances by 12 percent, recalibrated dampers and steering and a thicker-rimmed steering wheel. Because of the higher rolling resistance tires, however, the Performance Package kills four miles off of the electric driving range.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: