2009 Cadillac Escalade Sport Utility 4-door 6.2l Fully Loaded 1-owner No Res!! on 2040-cars

Auto blog

GM recalls 2022 Cadillac XT5, XT6 and GMC Acadia for suspension issue

General Motors is recalling a relatively small number of 2022 Cadillac and GMC crossovers to address the potential for missing or loose rear suspension hardware that is being blamed on a lapse in quality control at the company's Spring Hill facility. The campaign covers 223 examples of the Cadillac XT5, 159 examples of the Cadillac XT6 and 354 examples of the GMC Acadia. "General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 model year Cadillac XT5, XT6, and GMC Acadia vehicles," GM said in its defect report. "A fastener in the left-rear suspension toe link in some of these vehicles may not have been fully tightened during suspension assembly. After an assembly process was moved to a new area, error proofing equipment was not initially set up properly, which allowed a window where the operator might miss tightening certain fasteners without the failure being flagged." The issue was discovered by a quality engineer at the Spring Hill facility in March of this year, at which point GM conducted an audit to determine which and how many vehicles may have left the factory with improperly torqued or missing fasteners, narrowing down the recall population to the above 736 vehicles. No incidents associated with the defect have been reported in customer vehicles.  Related video: Recalls Buick Cadillac GM Ownership Safety

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Cadillac Elmiraj has production potential

There are many reasons to love the Cadillac Elmiraj Concept, but not the least of which is how production-ready this big coupe appears to be. Take out the overly fancy interior and a few conceptual elements of the exterior, and this looks like a coupe that could be in dealers now as the successor to the Eldorado.
On top of that, Automotive News is quoting Bob Ferguson, Cadillac senior vice president, as saying that a production version of this car is "very doable." AN adds that if the Monterey showstopper gets the green-light, this car would compete against the upcoming Mercedes-Benz S-Class Coupe and would based on Cadillac's upcoming rear-wheel-drive flagship sedan due out in 2015. The range-topping coupe would debut sometime after the sedan model. Cross your fingers.