2008 Cadillac Escalade Ext - Navi, Moon, Heated/cooled Seats, Camera, 22s, Wow ! on 2040-cars

Auto blog

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

How Cadillac improved power output in 2016 ELR by 25 percent

Earlier this year, Cadillac announced that the 2016 ELR would come with a big price drop and a powertrain that packs 25 percent more power output. That's a lot more oomph, but it didn't sound like the Caddy engineers made any major changes to the engine or motors. So, what happened? Let's refresh our memories with the numeric details. The 2016 car is 1.5 seconds quicker to 60 miles per hour than the 2014 model (there was no 2015), down to 6.4 seconds. The 2014 put out 295 pound-feet of torque. For 2016, it will be 373 lb-ft. The specific breakdown of the various components in the powertrain has not been disclosed, but from what we can tell, the two electric motors and the 1.4-liter inline-four engine in the new ELR are not that much different than those in the old one. Sam Abuelsamid, senior research analyst at Navigant Research (and former writer here at Autoblog) said that any of the unspecified upgrades would be difficult to tell on a part-by-part basis, but the overall effect will be noticeable. "The changes to the ELR as I understand them are analogous to getting more performance out of a 1965 Mustang with the entry version of the 289 cubic-inch V8. You can replace the carburetor with a larger version that enables more air and fuel to flow into the engine, thus producing more power. The basic engine hasn't changed, but power capability is being unleashed by feeding it more." "Cadillac has changed components in the power electronics to enable more current flow into the motor and thus produce more torque. When you do this in the Mustang, you probably need to replace the rear axle gears and use a beefier clutch to transmit the power to the wheels. Similarly, the ELR probably has some upgraded clutches, bearings, and gears to withstand the increased total output." Cadillac spokesperson David Caldwell told AutoblogGreen in an email that the new ELR does indeed have more than just new lines of code. "One could not 'reflash' a previous ELR to get the performance of a 2016," Caldwell said. "If one only changed software you would not get the performance upgrade fully, as the 2016 creates higher current, more power. So these have been upgraded physically – hardware.

Cadillac CT6 loses the entry-level 2.0-liter turbo four-cylinder

General Motors continues its engine rationalization among product lines. A few days after Chevrolet dropped the old-generation LTG 2.0-liter turbocharged four-cylinder from the Traverse, Cadillac has jettisoned the new-gen LSY 2.0-liter turbo four from the CT6 range. Given a look at the dealer ordering system, Cadillac Society said the 2.0-liter option shows "built out" or "no longer available," and the online configurator at the Cadillac site confirms the omission. The retired engine can be had in the XT4 crossover, rated at the same 237 horsepower and 258 pound-feet of torque. This means a couple of things for the big sedan. The CT6 entry price was $50,495 before destination, but fitted with the now-base 3.6-liter six-cylinder, the entry price has gone up to $55,495. The other change is that rear-wheel drive is no longer available; the three remaining engine choices come with all-wheel drive. Those engines are the NA 3.6-liter V6 with 335 hp and 284 lb-ft of torque, a 3.0-liter twin-turbo V6 with 404 hp and 400 lb-ft, and coming in a few months, the detuned 4.2-liter Blackwing twin-turbo V8 with 500 hp and 574 lb-ft, down from 550 hp and 627 lb-ft. Cadillac Society thinks one of the possibilities for making the move could be that GM is having a hard time meeting demand for the 2.0-liter. That might be, but we think no matter the reason, the result puts more logical pricing between the midsize CTS/CT5 and the full-size luxury flagship. We don't know how Cadillac will price the coming CT5, but there's now an $8,005 difference between the CTS and the CT6, instead of the $4,000 gap when the 2.0-liter was a CT6 option. Mercedes-Benz, for instance, puts a $12,000 gap between the C-Class and the E-Class, a $38,000 gulf between the E-Class and the S-Class. There's a $19,000 difference between an Audi A4 and A6, a $25,000 difference between an A6 and an A8. It isn't clear if this will affect every other market where the CT6 is sold. The Canadian, Mexican, and French Cadillac site configurators don't list the 2.0-liter turbo, but the Chinese Cadillac site does.