2008 Cadillac Escalade on 2040-cars

Auto blog

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

Recharge Wrap-up: Lyft partners with Didi Kuaidi, Cadillac uses ultracapacitors

Lyft and Chinese on-demand transportation venture Didi Kuaidi have announced a partnership. Additionally, Didi Kuaidi is investing $100 million in Lyft. The two ridesharing companies will share technology and provide interoperability between platforms. For users, this means it will be easier to get around when traveling between the US and China. "In today's rideshare environment, where every region presents a unique set of challenges and opportunities, partnering with the homegrown leader is the winning approach to Chinese expansion," says Lyft President and co-founder John Zimmer. Learn more in the video above, and in the press release below. Car2go has announced service in Miami Beach, FL. Beginning October 1, the one-way carsharing service will expand its boundaries beyond its current Miami service area to include neighboring Miami Beach. "We're thrilled to see car2go expand to Miami Beach," says Miami Beach Mayor Philip Levine. "Miami Beach residents and visitors are increasingly seeking new, environmentally conscious options to move around North, Middle, and South Beach, and carsharing is an important part of realizing that vision." Read more from Car2go. ClipperCreek has added the HCS-30 EVSE to its product line. The 24-amp, 240-volt Level 2 charging station is designed for residential and workplace duty. It allows for faster charging without the customer having to upgrade their electrical service panel. Delivering about 20 miles of range per hour of charging, the HCS-30 EVSE can charge most EVs in about four hours. Pricing begins at $565. Read more from ClipperCreek. Cadillac will use ultracapacitors in its stop-start systems for 2016. Rather than relying on battery power to run electrical systems while the engine is not running, the utracapacitors can provide a stable flow of energy without losing lifespan to repeated cycling. Supplied by Maxwell Technologies, the ultracapacitors are also lighter than batteries and, according to Cadillac, provide smoother restarts. The 2016 models to use the updated stop-start technology as standard will be the ATS and CTS, with the exception of the V performance variants. Read more at Green Car Reports. Lyft and Didi Kuaidi Announce Strategic Partnership, Building Toward a Collaborative Global Ridesharing Alliance - Didi Kuaidi Invests $100 million in Lyft - Companies Introduce Ridesharing Coverage Between the U.S.

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.