2007 Cadillac Escalade Base Sport Utility 4-door 6.2l on 2040-cars

Auto blog

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

Cadillac CT6 to get twin-turbo V8

Say what you will about his decisions at Infiniti and now Cadillac, but Cadillac CEO Johan de Nysschen knows how to deliver a compelling interview. During an online Q&A session with Jalopnik readers, de Nysschen offered substantial hints at what's coming for the brand. By dropping coordinates on the brand's star chart, in reading the entire thing and connecting the dots you can see a Cadillac that is much grander than the one we know now. The CT6 that got revealed during the Oscars telecast? Answering the question of whether it would have the performance to compete with a Mercedes S550 or BMW 750, de Nysschen said the big sedan's "lightweight body structure allows us to achieve formidable performance even with a twin-turbo V6. Imagine how this car would perform with a twin-turbo V8." In clarifying a subsequent question that also dealt with how the CT6 would compare to German rivals, he wrote that the CT6 would have "a very wide mix of engines, starting with a two-liter turbo, up to, eventually, a high-performance advanced V8 turbo." Patience and the future and the word "eventually" were heavy themes. The brand will embrace diesel engines as well, de Nysschen writing, "We will have four-cylinder and six-cylinder diesel engines, but not before 2019." As to the return of something like the XLR, which was Corvette muscle underneath a Cadillac body, he wrote, "I think in the fullness of time, we will get around to developing a high-performance, very-emotive sports car as a halo for the Cadillac brand. But we have so many projects to occupy us through 2020 that this will have to wait a little while." And on the design language across model lines, which enthusiast Cassandras have warned is too similar (as if that hasn't worked out for the Germans), he wrote that it is "undergoing gradual evolution and you will notice stunning new designs in future models, which remain unmistakably Cadillac and reflect our DNA but which take our sophisticated Art and Science design to a new level." But of course he would say that, which is what brings us back to patience and the future and eventually, when we'll see what this all really means. It all reads well enough, and we'd love to see it happen. One thing we won't see are the ducks that once adorned the Cadillac crest; when a reader asked if he could have them back, de Nysschen said, "No, you can't have them back. I play with them each night in my bath." Head over to Jalopnik for the full read. It's worth it.