2007 Cadillac Escalade Awd 4x4 Loaded! on 2040-cars

Auto blog

2020 Cadillac XT5 leaks onto web, adopts elements from smaller XT4

Cadillac just showed the new XT6 at the 2019 Detroit Auto Show, but today's news covers its smaller brother the XT5. A couple of leaked images on GM Authority along with information about the cars squirmed its way onto the web for the 2020 mid-cycle refresh, and we have the details for you. In looking at the shots here, not much has changed. The mesh grille is the most obvious update, adopting the same look as the compact XT4 crossover. Its lower grille has ever-so-slightly grown in size, and the headlights and taillights get new internal LED designs. Yawn. Better news comes out of the powertrain side. Information from the leak suggests GM's updated 2.0-liter turbo four-cylinder will be tapped for duty. As of now, the 2.0-liter offered in international markets has not been an option in the U.S. That could very well change this time around, since it's already being used in one Cadillac — see our first drive of the XT4 with this engine for the full breakdown on its improved refinement and efficiency. The 3.6-liter V6 will undoubtedly carry over, but it'll be getting the GM nine-speed automatic also paired to the new four-cylinder. This should be a marked improvement over the Aisin-based eight-speed torque converter it makes do with now. We weren't exactly blown away by the Cadillac XT6's interior, but expect styling elements from the slightly newer Caddy SUV to make its way to the XT5, too. A reveal for this updated crossover should be on its way soon, as GM will most likely be selling the updated 2020 XT5 before the year is done. We asked GM if it could confirm or deny any of the information in this report, and will update when we hear back. Related video:

Cadillac XT4 crossover reveals its lighting

The upcoming Cadillac XT4 compact crossover has once again been spotted, this time with less camouflage and an update to its lighting. Specifically, the little crossover is sporting production lighting front and rear, and it's sure to make the luxury SUV one of the boldest-looking Cadillacs. Part of the reason for this comes from the taillights. As we suspected from the last set of spy shots, the XT4 will have highly distinctive lights that run the full height of the C-pillar. Though it's a similar design to that of the Escalade, it's made more interesting by the significant forward rake of the rear pillar. Not only that, but that pillar is quite thick, too. The look is actually reminiscent of the old CTS wagon. Moving around the side, the reduced camouflage reveals that the doors and quarter panels are fairly conservative and lacking in many creases or bulges. We can make out the edges of what will likely be black plastic fender flares and rocker panel cladding. Finally reaching the front, we see that the headlights are similar to those of many current Cadillacs, including the recently refreshed XTS sedan. The main part of the lamp starts high up and is slightly horizontal like the Escala concept, but they extend over the fenders and a strip of LEDs descends down the front. A previous report noted the XT4 will be built in Kansas on the Chevy Malibu platform. That means it will be a front-drive-based vehicle likely offering both front- and all-wheel-drive. Under the hood will probably be at least one turbocharged four-cylinder engine, with a second, more powerful upgrade option a possibility. We expect to see the fully revealed model to show up by the end of 2018. Related Video: Featured Gallery Cadillac XT4 spy shots View 15 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt4 cadillac xt3

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: