Triple Black Eldorado Biarritz Coupe on 2040-cars

Auto blog

Such Sweet Sorrow: Cadillac's CTS-V gets an Irish wake

As the saying goes, all good things must come to an end. The honkin', stonkin' second-generation CTS-V, powered by Cadillac's brawny supercharged 6.2-liter V8 has been a very good thing. And now that the 500 final coupes – the only CTS-Vs designated 2015 models – have been built (just five remain unsold as of this writing), it is indeed a good thing that's come to an end. But Cadillac is not letting 2009–2015 CTS-V go gently into that good night, even as its replacement is poised to debut in just in just two months at the 2015 Detroit Auto Show. Instead, Cadillac invited us to Austin's Circuit of the Americas racetrack for what it called an "Irish wake" for the model that has proven to be one of the quickest and most charismatic models in General Motors' history. If you don't know what an Irish wake is, if you envision storytelling, songs, debauchery and more than a little liquor, you'll be in the ballpark. In this case, though, adrenaline substituted in for the booze, with squealing tires and shrieking V8s providing the singing. The debauchery took the form of an all-you-can-drive lapping of COTA in all three bodystyles – coupe, sedan and wagon – and the stories were told by the grins plastered on our faces all day. First and foremost, we'll miss the CTS-V's perfect balance of luxury and sportiness. Even after six years with no major changes, the CTS-V is surprisingly spry. Certainly, you never forget that it's a heavy thing, weighing in anywhere between 4217 pounds for the manual-equipped coupe to 4424 for an automatic wagon, but with 0-60 times of about four seconds and the ability to hit about 150 mph on COTA's back straight, the Vs remain an absolute hoot on the track. Sure, some of its details – the blocky front fascia shapes and the spoiler on the sedan and coupe models, for example – look a bit dated, but the overall design still looks sufficiently badass. The interior design has worn pretty well, too, and however Cadillac may feel about center stack buttons being so last decade, we favor them over the capacitive-touch madness of today's CUE system. We're not going to bother doing another full review of the car here, but suffice it to say, there is plenty we will miss. First and foremost, will be the CTS-V's perfect balance of luxury and sportiness. Rumor has it that Cadillac will offer the 6.2-liter LT4 V8 in the next generation (we predict about 600 hp), but we hear that the new car will skew more toward luxury than balls-out performance.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Cadillac XT4 crossover to be built in Kansas City

Cadillac's upcoming XT4, a crossover we've previously known as the XT3 in a long series of spy shots of heavily camouflaged mules, will be built at General Motors' assembly plant in Kansas City on the same platform as the Chevrolet Malibu, Bloomberg reports, citing people familiar with the plan. That will give Cadillac another entry in the red-hot luxury crossover segment and, GM hopes, help to reverse a sales slump in the U.S. It'll also breath life into the Kansas City plant that makes the slow-selling Malibu, where GM cut a third shift last year, by sharing the assembly line between the crossover and sedan and defraying costs for each vehicle. The XT4 was known most recently as the XT3, with styling cues based on the Escala concept sedan from 2016. It's slightly smaller than the XT5, Cadillac's top-selling vehicle, and will also augment the full-size Escalade in Cadillac's stable of SUVs when it makes its expected debut later this year. Cadillac last week reported its second-highest-ever sales mark with 356,467 vehicles, an increase of 15.5 percent over 2016. But that mark papers over an 8 percent sales decline in the U.S. to 156,440 vehicles. The luxury brand is on a hot streak in China, where sales jumped 50.8 percent last year to 175,489 units.Related Video: Image Credit: Brian Williams Plants/Manufacturing Cadillac Chevrolet GM Crossover sales cadillac xt5 cadillac xt4 cadillac xt3