2014 Cadillac Elr Base on 2040-cars

Auto blog

2016 Cadillac CTS-V arrives with 640 hp, 200-mph top speed

Ask the company's executive team, and they'll tell you "this is the maximum Cadillac V-Series." It's the 2016 CTS-V sedan, and it packs the very best of what's possible at Cadillac. And the company says it doesn't think "anyone thought it was possible that we could push [the CTS-V] this far." The big news is what's underhood: General Motors' supercharged, 6.2-liter LT4 V8, tuned to 640 horsepower and 630 pound-feet of torque. That's 10 hp and 20 lb-ft less than the monstrous Corvette Z06, and the result is the most powerful car Cadillac has ever produced. With rear-wheel drive, launch control and the eight-speed automatic transmission (sorry, folks – no more manual transmission here), Cadillac says the 2016 CTS-V will sprint to 60 miles per hour in just 3.7 seconds, on its way to a top speed of 200 miles per hour. Naturally, Cadillac's engineers say they have tuned the CTS-V to ensure it can put all that power to the ground with the most precision and poise possible. That starts with the excellent Magnetic Ride Control active damping system (with a claimed 40-percent increase in responsiveness)and a 25-percent increase in structural stiffness that should improve overall handling and steering. What's more, a high-performance Brembo brake package comes standard, as do 19-inch alloy wheels wrapped in seriously sticky Michelin Pilot Super Sport tires that will reportedly offer 1g in lateral acceleration. Cadillac also says that all changes to the bodywork are functional. That includes a carbon-fiber hood, front splitter, rear spoiler and diffuser that are super light and aid with aerodynamics and weight reduction – all of which will be available as an optional package for folks who like the exposed carbon look. Inside, it's more of what we're used to on lesser CTS models, but there's newly optional carbon fiber trim, microfiber suede upholstery trim, and some seriously awesome Recaro seats. Additionally, as we exclusively reported earlier, Cadillac will offer GM's Performance Data Recorder in the CTS-V. It records high-definition video with data overlays that's sharable via social media. Beyond that, Cadillac will offer the usual smattering of tech goodies, including Siri Eyes Free, OnStar with 4G LTE, CUE infotainment with navigation and Bose audio. The CTS-V will launch later next year, following the debut of the smaller ATS-V. In the meantime, the sedan will officially bow at the 2015 Detroit Auto Show in just a few weeks.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Cadillac can't keep up with Escalade demand, can't move its sedans

No matter how much Cadillac revitalizes its lineup and its image, it seems that all consumers want is the Escalade. In fact, Automotive News reports that General Motors can't keep up with demand for the fullsize luxury SUV, despite sticker prices that start at over $70,000 and approach six figures at the top end of the spectrum. Contrast that with sedans like the ATS and CTS, which are far cheaper but which Cadillac hasn't been able to move fast enough to keep up with production, prompting both the manufacturer and dealers to offer substantial incentives to keep them from piling up. Cadillac had been resisting a price cut of the ATS or CTS, lest it hurt resale values – itself a factor that could explain consumers' reluctance to buy them in the first place – but been offering subsidized leases, discounted financing, rebates and cheaper options. Combined with incentives from individual dealers, according to AN, buyers can be looking at five-figure discounts on buying a new Cadillac sedan. And now, finally, it seems the CTS will indeed get a little bit off its bottom line. Yet GM has been producing the ATS and CTS at rates that their sales can't keep up with. The automaker was forced to idle the plant in Lansing, MI, where it assembles the ATS and CTS for six weeks starting this past December. And since it reopened late in January, it's been reduced to a single shift as dealers try to move the metal they've already got. Meanwhile the plant in Arlington, TX, that produces the Escalade and its Chevy and GMC siblings has been running on overtime, with three shifts throughout the week and even into the weekend to keep up with demand. Profitable as it's been for Cadillac and GM, though, the Escalade does not represent the future of where it wants to take the brand - separating the Escalade as almost a brand unto itself that's been left out of the company's new naming scheme. If only it could make its sedans as successful as its fullsize SUVs, it'll be all set.