2000 Cadillac Eldorado Etc Touring Low Miles (76k), Sunroof 99.00 No Reserve on 2040-cars

Auto blog

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

GM extending warranties on Cadillac CTS-V and Chevy Camaro ZL1 for supercharger issue

Okay General Motors, we've sat by and watched you recall the compact cars, crossovers and pickup trucks, and aside from reporting on it, we've been fairly quiet. This, though, this will not do. We can almost tolerate the recalls on the bread-and-butter cars, but leave the performance vehicles alone.
According to a report from The Car Connection, GM has discovered a problem with the superchargers of the 6.2-liter V8s found in the Chevrolet Camaro ZL1 and the Cadillac CTS-V. Apparently, the issue rests around the internal bearing shaft grease, which can become contaminated (we aren't sure with what). If left unchecked, it'll first lead to a rattle at idle, which goes away under slight throttle. The real warning stage is when a high-pitched squeal develops, signaling that the bearing shaft has failed. Naturally, severe engine damage is the next step (although it's possible that the engine will also just refuse to turnover, although neither case is desirable).
According to TCC, GM will replace the superchargers on vehicles that have exhibited symptoms of bearing shaft failure free of charge. It will also, allegedly, be extending the warranty on all supercharged ZL1s and CTS-Vs to 10 years or 120,000 miles (whichever comes first), from the date of purchase. Officially, only 2009 to 2013 CTS-Vs and 2012 to 2013 ZL1s are suffering from this issue.

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.