1991 Cadillac Eldorado Low Miles 56k!! on 2040-cars

Auto blog

Cadillac CT5 vs. BMW 3 Series | How they compare on paper

Cadillac just introduced the CT5 sedan at the 2019 New York Auto Show, and it's set to replace both the larger CTS and smaller ATS in the brand's lineup. We have all the details and features for you, in addition to a deep dive with the car's chief engineer, but now it's time to see how it stacks up to the long-time standard bearer in this class: the BMW 3 Series. Now, the car is a bit larger than the completely new 2019 3 Series, but Cadillac says the 3 and the rest of the compact luxury sedan class is its target for this car. We'll dive further into this little conundrum later. This comparison will look at how these vehicles measure up on paper, as we haven't driven the CT5 yet. That will come later, but we're expecting it to be a proper sport sedan competitor with the 3 Series, since Cadillac is building it off GM's dynamically superb Alpha platform. Now let's get on with the comparison. Powertrains and performance Both of these sedans come standard with 2.0-liter turbocharged four-cylinder engines. The BMW four-pot is a bit more potent, coming in with 18 more horsepower and 37 pound-feet of torque more than the Cadillac. Here's our driving review of the BMW. The only upgrade engine for both available initially are turbocharged six-cylinders. BMW offers up its revised inline-six, while Cadillac offers a V6. These six-cylinders are both 3.0 liters. Cadillac bests the BMW in brute torque by 31 pound-feet, but BMW takes the horsepower prize, making 47 more ponies. It's hard to say which car will actually be faster to 60 mph — they'll probably end up being about the same once official numbers are out. This segment used to be one guaranteed to offer a manual transmission, but that's not the case anymore. Neither Cadillac nor BMW will offer a manual to start, but expect to see the stick shift return to higher performance models of each car. For now, they both get torque-converter-style automatic transmissions. One dimension that isn't going away from either anytime soon is rear-wheel drive. Both cars offer rear-wheel and all-wheel drive in every spec available. Fuel economy for the 3 Series is impressive at 30 mpg combined with the four-cylinder. We'll have to wait and see if Cadillac can challenge that figure with its less powerful engine. Size and practicality Here's where a lot of the confusion about the Cadillac CT5 sets in. The CT5 is a tad larger than the 3 Series in its exterior dimensions, but the interior specs are nearly identical.

2020 Cadillac CT5 debuts at N.Y. Auto Show as a proper sport sedan

The 2019 Cadillac CT5 is here, and it's not a tweener sedan. After having done battle with the luxury sedan world through cars that were either too large or too small, Cadillac is using the CT5 to take direct aim at the BMW 3 Series, Audi A4, Alfa Romeo Giulia and Mercedes C-Class. Specifically, the CT5 replaces the CTS, but takes on vehicles one class smaller than what the CTS did. So, let's take a look at what Cadillac is bringing to the table. To begin, GM knows it has a winner on its hands with the Alpha platform used on the CTS and ATS and the Camaro, so engineers adapted it to the CT5. This seems like a great start, because we all happen to love the driving dynamics from vehicles on this chassis. The wheelbase is a couple inches longer than the CTS, but the CT5 is a couple inches shorter in overall length. As a result, the wheels get pushed toward the corners of the car, leaving the CT5 with relatively short overhangs in the front and rear. It looks different than both of the to-be-discontinued Cadillac sedans, but we wouldn't call it revolutionary. The rear end isn't quite a "sportback," but it's a "faster" shape, eschewing a traditional sedan's long decklid for a sloping-roof look instead. This shape does come at the expense of rear seat headroom, but we'll dive into the interior later. We got a little preview of the powertrain setup before this official reveal, but details were scarce. The base engine is the recently new 2.0-liter turbo four-cylinder found in the Cadillac XT4. Just as it did in that vehicle, this engine makes 237 horsepower and 258 pound-feet of torque. While it might be down on power compared to the old 2.0-liter in the ATS (272 horsepower and 295 pound-feet) we found it to be incredibly smooth, refined and not lacking in thrust compared to the old unit. We're sure the four-pot will offer sufficient power for the CT5, but the 3.0-liter twin-turbo V6 is lying in wait. This engine makes 335 horsepower and 400 pound-feet of torque. Both engines are paired to a 10-speed automatic transmission and can be had in rear-wheel drive or all-wheel drive in every configuration. So yes, you can get the V6 with rear-wheel drive, thankfully. Cylinder deactivation is also equipped to both these power units — the four-banger is able to run on two cylinders, while the V6 drops to four. Cadillac was entirely transparent about its new pumped-in engine sound strategy, too.

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).