1991 Cadillac Eldorado Just Perfect Look At The Photos As Nice As You Will Find on 2040-cars

Auto blog

May 2016: FCA wins, Ford and GM stumble on weak car volumes

The May 2016 sales numbers are in, and it looks as though FCA is getting some vindication for boldly cancelling two slow-selling car models. Meanwhile, Ford saw overall sales dip and GM's May volume took a big dive versus the same month in 2015. While Marchionne's decision to axe the Chrysler 200 and Dodge Dart has drawn criticism as being short-sighted, it's working for FCA so far. Although the Dart and 200 aren't out of production yet and no capacity has been shifted to crossover or trucks, May's numbers show that the emphasis on Jeep and Ram models makes sense right now. FCA's US sales rose 1 percent last month compared to May 2015, putting the year-to-date total at 955,186 vehicles, an increase of 6 percent compared to the same period last year. Standouts included the Jeep Renegade, Compass, and Patriot, and the Fiat 500X. Ram pickup sales were down 3 percent. And your fun fact is that Alfa Romeo sales were up precisely 10 percent, for a total of 44 4Cs sold versus 40 in the same month last year. At FoMoCo, the Ford brand took a hit to the tune of 6.4 percent from May 2015 to 2016, registering 226,190 sales last month. Lincoln showed improvement on its modest numbers, going from 9,174 to 9,807, a 6.9 percent increase. Overall, Ford was down 5.9 percent for the month to 235,997; despite the slump, year-to-date total Ford sales are up 4.2 percent to 1,112,939. Strong sellers included Escape, Expedition, F-Series, and Transit - big stuff. Most small and/or efficient models (Fiesta, Focus, Fusion, C-Max) saw sales slides. Fusion sales were also down, likely due to effects of model changeover to the freshened 2017 model. Ford has promised four new crossovers and SUVs by 2020 and if things keep trending this way the company will be able to sell them, but things could change in the next four years. GM saw the worst of it for domestic brands. Retail and fleet sales were down for each of the four divisions, with the May 2016 total dropping 18 percent to 240,450 vehicles. GM's year-to-date sales are down 5.0 percent in 2016 to 1,183,705. Both the Sierra and Silverado were down significantly, and the majority of Chevy, Buick, GMC, and Cadillac nameplates saw sales decreases, with both small cars and larger utilities included. Not even big stuff could help GM this month, it seems. We'll have more on the rest of the industry's May sales as those figures trickle in.

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

Cadillac president de Nysschen says electrification coming 'across the spectrum'

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video: